Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need help with Toyota Yaris hybrid 2013 P0A0F
16-09-2017, 16:09 PM,
Post: #1
|
|||
|
|||
Need help with Toyota Yaris hybrid 2013 P0A0F
Dear,
I need help with following fault code: Toyota Yaris hybrid 2013 P0A0F Engine starts and run then cut off. Please provide me with the repair procedures. Best Regards, Waliduk |
|||
16-09-2017, 18:29 PM,
(This post was last modified: 16-09-2017, 18:30 PM by IM6.)
Post: #2
|
|||
|
|||
RE: Need help with Toyota Yaris hybrid 2013 P0A0F
(16-09-2017, 16:09 PM)Waliduk Wrote: Dear, Witch One P0A0F-204 P0A0F-205 P0A0F-206 P0A0F-238 P0A0F-524 P0A0F-525 HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM: P0A0F-204, P0A0F-205, P0A0F-206, P0A0F-524, P0A0F-525; Engine Failed to Start P0A0F-204 - Engine Failed to Start P0A0F-205 - Engine Failed to Start P0A0F-206 - Engine Failed to Start P0A0F-524 - Engine Failed to Start P0A0F-525 - Engine Failed to Start DESCRIPTION If an engine malfunction occurs, an engine malfunction signal is sent from the ECM to the power management control ECU (HV CPU). When the power management control ECU (HV CPU) receives this signal, it sets a DTC and performs fail-safe control. image INSPECTION PROCEDURE PROCEDURE 1. CHECK DTC OUTPUT (ENGINE AND ECT) (a)Connect the Tech-stream to the DLC3. (b)Turn the power switch on (IG). ©Enter the following menus: Powertrain / Engine and ECT / Trouble Codes. (d)Check if DTCs are output. Result: image HINT If P0A0F-204, 205, 206, 524, or 525 is output even though the ECM has not detected a malfunction, there is a malfunction in the power management control ECU. Turn the power switch off. B -- GO TO DTC CHART (SFI SYSTEM) See: A L L Diagnostic Trouble Codes ( DTC ) > Diagnostic Trouble Code Descriptions > Diagnostic Trouble Code Chart A -- REPLACE POWER MANAGEMENT CONTROL ECU See: Power Distribution Module > Removal and Replacement > Components |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content