Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Mini r60 DSC fault 5e88
23-07-2018, 09:15 AM,
(This post was last modified: 27-07-2018, 13:56 PM by Clusters.)
Post: #1
|
|||
|
|||
Mini r60 DSC fault 5e88
Hello, from last week I try to understand what the problem is but without the effect ...
Mini R60 allroad, dash fault 4x4 and dsc in ista fault: 5e88: "DSC All-wheel drive control, output stage, error" In the control plan, ista wants to change the DSC module, so I changed it to used, without any effect, then I buy new from BMW, I code it, but it's still the same ... I checked the wires, I have no idea where to look, will someone help me? Some suggestions or experience all this? |
|||
23-07-2018, 10:56 AM,
Post: #2
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
Hi, on other forums I found: 5E88 - DSC: Hydraulic unit, pressure sensor: internal
and from E90: pressure sensor Ci2: error in voltage supply (ciruit 2) But i suppose the pressure sensor and the hydraulic pump are part of the new unit...strange Maybe software issue? And rather check fuses and grounds. |
|||
23-07-2018, 11:32 AM,
Post: #3
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
I haved see those topics, first time i have change hydraulic block with electronic but doesn't works, soo i have brand new only electronic without hydraulic block. I have flash with ISTA/P and WINKFP but fault dosen't go off.
The error pops up immediately after switching on the ignition, and start engine. Its making me crazy... |
|||
23-07-2018, 15:25 PM,
Post: #4
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
I hate these Minis. What if used hydraulic block with pump was faulty too? Can you check pressure in Ista?
|
|||
24-07-2018, 07:16 AM,
Post: #5
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
Pressure is coming up when brake is pressed, electric motor is working, because abs work's.
What can be damaged in hydraulic blow if everything i working ? |
|||
27-07-2018, 06:02 AM,
Post: #6
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
SOLVED
In my case the problem was with EMCD 33147603858 I have replace it, with used one, and all faults on dashboard shuts off. Maybe, this will helps somebody in the future. |
|||
15-10-2018, 15:55 PM,
(This post was last modified: 15-10-2018, 16:02 PM by volavka.)
Post: #7
|
|||
|
|||
RE: Mini r60 DSC fault 5e88
I had the same issue as you, replaced the pump and the 5e88 went away, but I still have code 5e83. I went ahead and replaced the emcd clutch, but I still have the 5e83 code. After replacing the clutch, did you do any specific coding or take any other actions?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw/Mini cic/champ emulator e9x 66x Rxx | megalo84 | 5 | 406 |
15-06-2024, 08:56 AM Last Post: Pedrom92 |
|
mg1 isn mini | Gabriel87 | 2 | 143 |
07-06-2024, 22:22 PM Last Post: foxportal |
|
Please, can somebody help me to ZCS CODE from a MINI R50? | hipolitogt | 2 | 69 |
30-05-2024, 10:30 AM Last Post: hipolitogt |
|
VO MINI F56 | Bimmer540 | 5 | 895 |
27-05-2024, 22:09 PM Last Post: dekota28 |
|
Mini Connected - NBT EVO | Billyjoe69 | 1 | 113 |
25-05-2024, 14:47 PM Last Post: dumitru.o |
|
BMW/Mini strange EPS part number | Alyn546 | 4 | 128 |
23-05-2024, 07:54 AM Last Post: Alyn546 |
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 376 |
22-05-2024, 22:09 PM Last Post: Node |
|
Bmw x1 f48 disabled fault | kuki88 | 7 | 333 |
17-05-2024, 08:00 AM Last Post: kuki88 |
|
VO required for Mini Cooper S 2004 | DirkP35 | 0 | 60 |
13-05-2024, 20:28 PM Last Post: DirkP35 |
|
FRM3 MINI eee solution | ArcziArcz | 4 | 288 |
11-05-2024, 07:58 AM Last Post: Dash_Burner |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content