Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2015 peugeout 208 abs configuration
07-10-2018, 20:07 PM,
(This post was last modified: 07-10-2018, 20:15 PM by iky786.)
Post: #1
|
|||
|
|||
2015 peugeout 208 abs configuration
Hi there.
I working on a Peugeot 208 1.6 HDi 2015 with VIN: VF3CC9HP0FT035392 Car got ABS fault, ABS pump has been changed old was damaged in crash, ABS pump has been changed with matching part numbers car, now starts. Trying to do configuration off used pump but communication error, checked all wiring, it seems all fine in. I am using Diagbox 9.34 online, when scanning the car it says ABS pump not recognized, but when you click on it you can see pump data etc and model name. In ABS pump i get fault code BSI operating fault U1318 communication error. I have checked CAN-Bus wiring for voltage, seems fine on 2 sets off wire, i get 2.5V. On other sets of CAN-Bus wiring there is no volts from the car side but voltage coming from ABS pump around 9V. I have managed to get the ABS pump light and traction control light off, some calibration off gyro sensor. But can't get the TPMS light off. does anyone no the location off TMPS think this is fried Any help would be great. Thanks. |
|||
18-10-2018, 18:10 PM,
(This post was last modified: 18-10-2018, 18:11 PM by apol.)
Post: #2
|
|||
|
|||
RE: 2015 peugeout 208 abs configuration
TPMS in 208 is indirect over ESP there no sensors in wheels and no reciver
|
|||
Reputation: +1 - iky786 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content