[ArcziArcz]

I have a problem with the coding of the BMW F25 USA prelci with xenon and led lamps at the rear.
This car came to me after conversion from us to eu, which was done a long time ago.
The rear position led lights do not work and the position light was on the brake bulb.
After coding the FRM module to the US, the LED taillights do not work like earlier, the position lights on the bulb started to shine as if the stop was pressed all the time, the leveling error started to light up, the direction indicators also do not light up.
Then I recoded the FRM to EU, the leveling error did not appear, but nothing changed with the lights and after pressing the brake, the stop bulb errors light up.
Any ideas what to do here ??
The car is factory equipped with xenons and LED lights at the rear.

[TheNine90]

Dont code the FRM since this will affect other functions. You have to edit the values manually.

[ArcziArcz]

Dont code the FRM since this will affect other functions. You have to edit the values manually.

Can you tell me what needs to be changed to make it work?
It makes me wonder that after coding the lights do not return to the factory state.
Thank you in advance

[TheNine90]

Are the lights modified or replaced?
You need to compare the two cafd and check what is necessary to change in lamp mapping.

[ArcziArcz]

Are the lights modified or replaced?
You need to compare the two cafd and check what is necessary to change in lamp mapping.

They were replaced with the same as the factory ones only EU

[TheNine90]

they still need coding