[henkb]

Hi Guy's

does anybody nows how or have some dococumentation how to Delete a dtc from a control unit with E-sys, so that it dont show an error annymore??

Hope you can help.

greetz Henkb

[__mkw]

Click "External Applications" in the left menu.
Click "External Application"
Double-click "Transmitter"
Scroll to the bottom and double-click "... Clear all DTCs ..."

[anchored]

I know you can clear, is it possible to read them?

[aboulfad]

I know you can clear, is it possible to read them?

Just above, "read all DTC", you have to know the ECU IDs to know which is which, and then you can enter the fault ID in ISTA for description.

[henkb]

Click "External Applications" in the left menu.
Click "External Application"
Double-click "Transmitter"
Scroll to the bottom and double-click "... Clear all DTCs ..."

ok, but thats not what i mean. (thanks for replying)
what i mean is to shutt off a code permanently.
removing it completely so it never shows again...

greetz.

[rafi-88]

Just fix the car

[Kuiyt2]

I know you can clear, is it possible to read them?

Just above, "read all DTC", you have to know the ECU IDs to know which is which, and then you can enter the fault ID in ISTA for description.

How do you enter fault ID into ISTA without vehicle connected?

I found it! Thank you!