[keyzex]

I read it with UPA USB and programmed from 200064 to 185000 KM with M35808 programmer.

When I soldered back the eeprom and installed cluster in the car so was the panel black, no meters worked.

Then I programmed the original dump, with the same result.
The car starts anyway.

So I would be grateful if someone could verify if Upa read it wrong the first time and destroyed it.
   

M35808_0263606305.rar
File Type:
Downloaded:	6 times
Size:	469 bytes

[teerak2uk]

Did you erase after saving dump?

Is chip mounted correctly or 180 degrees rotation wrong?

[keyzex]

Yes, I erased and I'm 100% sure that it is correctly mounted.

I always mark the position before I desoldering and remove eeprom.

[kizagt]

Use another programer for erase 35080. Try to read again i compare with dump that you write.

Послато са D6503 уз помоћ Тапатока