Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT on table problem with take DE or upgrade
|
19-02-2017, 15:21 PM,
Post: #1
|
|||
|
|||
|
NBT on table problem with take DE or upgrade
Hello
I have problem with take off DE file or upgrade NBT on desk using ESYS. I can coding using FDL and coding using FA file. But when i want upgrade or take DE file i have this error : Error: SWT ECU diagnosis " ( = BaseVariant HU_NBT , DiagAddress = 63 ) " failed ! ( C057 ) -message ID is used in multiple times , so MessageText May be ambiguous - the result contains an error ( 370 ) Have some one this problem and resolve it ? Im trying using ZGW and without it . I have CANBRIDGE from carsystem.co.ua Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-02-2017, 15:30 PM,
Post: #2
|
|||
|
|||
|
RE: NBT on table problem with take DE or upgrade
Hi
Used enet interface? Set this parameter on ediabas.ini inside folder Ediabad/bin |
|||
|
|
|
19-02-2017, 21:26 PM,
Post: #3
|
|||
|
|||
|
RE: NBT on table problem with take DE or upgrade
Yes i use enet
i was check edibas.ini and all is correct i can write vin and other to nbt but i cant import fsc --> StoreSIGCert RoutineResult: OK <-- ok --> StoreSIGCert RoutineResult: OK <-- ok --> CheckSIGCert <-- Error: SWT diagnosis for ECU "[BaseVariant=HU_NBT, DiagAddress=63]" failed! [C057] -MessageID is used multiple times, so MessageText may be ambiguous-the result contains an error [370] Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
|
|
|
20-02-2017, 11:31 AM,
Post: #4
|
|||
|
|||
|
RE: NBT on table problem with take DE or upgrade
Hi,
You using ethernet port only for extract DE file on the table ? |
|||
|
|
|
20-02-2017, 23:05 PM,
Post: #5
|
|||
|
|||
|
RE: NBT on table problem with take DE or upgrade
I was succes get DE files, problem was be in the NBT, but now i cant upgrade NBT on the desk
Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
|
|
|
21-02-2017, 10:15 AM,
Post: #6
|
|||
|
|||
|
RE: NBT on table problem with take DE or upgrade
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
