[larshutten]

Hi all,

I am facing this issue for the second time when flashing a NBT. BTLD/FLSL goes fine over UDS but SWFL fails all the time over HTTP. First time I solved it by flashing over UDS but don't want to spend another 3 day flash again. Anyone has a solution? Some extra info below.

Esys 3.31(launcher V3) with direct ENET to OBD cable. Connected over gateway via E-SYS connection manager. LAN settings are on default. See attached picture from my problem. Also tried it with icom and router but still same issue.

Also something else i noticed is that in network manager, lan adapter says no cable connected. While it is connected and orange/green light on laptop are on. It should at least tell me there is a cable connected but no internet connection possible?

Guess I am missing something stupid but hope some of you got a solution.

Kind regards

Edit: found the issue network adapter in laptop is faulty.

[tomushas]

Hi all,

I am facing this issue for the second time when flashing a NBT. BTLD/FLSL goes fine over UDS but SWFL fails all the time over HTTP. First time I solved it by flashing over UDS but don't want to spend another 3 day flash again. Anyone has a solution? Some extra info below.

Esys 3.31(launcher V3) with direct ENET to OBD cable. Connected over gateway via E-SYS connection manager. LAN settings are on default. See attached picture from my problem. Also tried it with icom and router but still same issue.

Also something else i noticed is that in network manager, lan adapter says no cable connected. While it is connected and orange/green light on laptop are on. It should at least tell me there is a cable connected but no internet connection possible?

Guess I am missing something stupid but hope some of you got a solution.

Kind regards

try read this and i think your understand

[litany]

Sent me this NBT unit, could flash it for you. Sometimes do couple daily.

[larshutten]

@tomushas
Without launcher same issue so not sure what else I need to look at in that thread?

@litany
Guess it is a laptop/software issue same problem with 2 NBT right after each other. Would be a lot of coincidence if both are "faulty". As mentioned first one flashed without any issue over UDS with icom.

[bmwcoder75]

Sounds you may be having some issues with your network adapter?
I would try to update device driver for the NIC but also for the motherboard CHIPSET and check windows logs to see if it shows anything relevant.
Usually I use a desktop for flashing HU
BTL is fine so you are good. Restoring the rest is easy.
I would try from a different PC (Desktop/Laptop) if I were you, probably gonna work. You don't even need to buy another ESYS PRO or ESYX license, just use normal ESYS

[larshutten]

@bmwcoder75
Thanks installing esys and psdz right now on other laptop going to try it tomorrow. If it works out with other laptop have to look into network adapter. Which i start to believe is the problem also have trouble with wifi connections sometimes...

[BusyBox]

Disable your firewall and all will be fine.

[bmwcoder75]

Disable your firewall and all will be fine.

Pretty sure this is not the first time he updates a NBT on bench and furthermore firewall service would not drop wifi like that.

[larshutten]

Problem solved. Network adapter in laptop is faulty, replacement is on it’s way. Thanks for the fast reply’s!