Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DME update with winkfp - now error "no coding"
31-08-2018, 17:44 PM,
(This post was last modified: 31-08-2018, 17:46 PM by willisodhiambo.)
Post: #1
|
|||
|
|||
DME update with winkfp - now error "no coding"
Updated E90 MV946 DME with winkfp but now i have an error in ista that dme is not coded. Strange, never known dme can be coded! How do i resolve? ISTAP out of the question as it is asking i replace kombi.
Any ideas? Maybe something available in winkfp special functions after programming but not had time to check |
|||
31-08-2018, 17:52 PM,
Post: #2
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
NCS Expert can do the coding.
| BimmerFiks AS | Instagram | |
|||
31-08-2018, 17:54 PM,
Post: #3
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
Have you tried to do a simple coding with NCSEXPER?
|
|||
31-08-2018, 18:05 PM,
Post: #4
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
|
|||
31-08-2018, 18:07 PM,
Post: #5
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
(31-08-2018, 18:05 PM)Enabled Wrote:(31-08-2018, 17:52 PM)SweetBMW Wrote: NCS Expert can do the coding. he is saying ISTA P is out of the question because of incorrect Kombi. Even though in Expert Mode, you cant always make ISTA P ignore incorret modules. NCS is better for this. Learn to use the programs, or dont bother with it, is my motto. | BimmerFiks AS | Instagram | |
|||
31-08-2018, 18:50 PM,
Post: #6
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
Ncs expert? No way! There is no dme in the modules list in ncsexpert. Unless there is a profile with this. Never seen dme in that list! Can someone elaborate? Anyone ever coded dme with ncs?
|
|||
31-08-2018, 18:55 PM,
Post: #7
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
Some times the module is not called "DME".
For example, in a R56 its called 4BMOT. |
|||
31-08-2018, 19:11 PM,
(This post was last modified: 31-08-2018, 19:13 PM by SweetBMW.)
Post: #8
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
(31-08-2018, 18:50 PM)willisodhiambo Wrote: Ncs expert? No way! There is no dme in the modules list in ncsexpert. Unless there is a profile with this. Never seen dme in that list! Can someone elaborate? Anyone ever coded dme with ncs? Only some modules are supported with coding. For example DDE in E60 diesel, not all has coding abilities but DDE7 has. Its called 4 6 or 8 depending on cylinders, and D or B for fuel type. For exmaple 4DMOT or 4BMOT or 8BMOT or 8DMOT. When programming a car with ISTA P. the possibilities on the DME is only Program, then DME\DDE is autocoded upon programming and there is no DME\DDE in the NCS Expert list. If the option is both P and C. Then you will find it in the list in NCS. 100% Guaranteed | BimmerFiks AS | Instagram | |
|||
31-08-2018, 20:34 PM,
(This post was last modified: 31-08-2018, 20:35 PM by Enabled.)
Post: #9
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
+6BMOT for the 6 cyl cars. Starting to see a pattern?
(31-08-2018, 18:50 PM)willisodhiambo Wrote: Ncs expert? No way! There is no dme in the modules list in ncsexpert. Unless there is a profile with this. Never seen dme in that list! Can someone elaborate? Anyone ever coded dme with ncs? That was a funny reply. |
|||
01-09-2018, 06:48 AM,
Post: #10
|
|||
|
|||
RE: DME update with winkfp - now error "no coding"
Aha! We learn everyday. Thank you all. SweetBMW, am enlightened!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content