[danyro]

Hi

I succesfully did the retrofit to my f25 but i have 2 annoying small issues:
1. HUD  - has a slant towards right and in order to have it plane, i need to set the rotation at maximum to the left in the HU2 settings plus some navi arrows are outside of the screen .
I tried to copy the warping settings from original ncd 6wa but still arrows are half outside of the hud. 
Tried also the hud service menu from istad but no success. 

2. No navigation info in the center of 6wb .Just small arrows between clock and mileage .
I tried below codings but no effect .
Hu2 => KOMBI_CIC = kombi_high
DKOMBI => NAVI_NBT_ENABLE = kein_nbt

Fa used - f10 and f15. With f15 fa, hu2 has no picture anymore but radio is working fine. 

I would appreciate any advice or info. 

Thanks

[danyro]

for those with the same issues mentioned at point 1 and 2 - managed to make it work via below fdl codings:

KOMBI:
NAVI_NBT_ENABLE : kein_nbt

NBT EVO:
FPK_COMING_ROAD_BMP Werte=00
KOMBIGUIDING_SCHALTBAR Werte=00
HIST_GAS_CONSUMP Werte=01
BASIS_KOMBI_MMI_LIST Werte=00
HUD_KOMPRIMIERUNG_ART Werte=01 (rle_2)
HUD_AUFLOESUNG Werte=01 (aufloesung_2)
KOMBI_AUFLOESUNG Werte=00
LOUPE_TACHO_KOMBI Werte=01
DRIVE_MODE_KOMBI Werte=01
CALMING_KOMBI Werte=00
MFID_KOMBI_VARIANT Werte=01
KOMBI_CIC Werte=00
SETTINGS_INFO_DISPLAY Werte=01

if you have HUD, you need to disable NAVI from displaying in hud via iDrive settings and it will appear on Kombi.
cannot be displayed in the same time on HUD and Kombi. Same with multmedia.