Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VID Ford recovery
06-11-2018, 06:02 AM,
(This post was last modified: 06-11-2018, 06:11 AM by QuantumECU.)
Post: #1
|
|||
|
|||
VID Ford recovery
Hello! Help solve the problem
FORD C-Max, a man was flashed a car and destroyed the correct VID. Stock firmware left. How to recover vid? There is only KESS and ELM327 WIFI and backup firmware. EGR | DPF | O2 | Remapping
Diagnostic & Coding BMW/VAG Online working by Teamviewer Working 24/7/365 on Worldwide |
|||
06-11-2018, 06:22 AM,
(This post was last modified: 06-11-2018, 06:24 AM by rexercio.)
Post: #2
|
|||
|
|||
RE: VID Ford recovery
Hi you can you use ELMconfig (it is better to use elm327 on cable) go into PCM then Configuration and READ from PCM. Then u can adjust everything u want and save. Report if that helps
look here on picture |
|||
06-11-2018, 06:55 AM,
Post: #3
|
|||
|
|||
RE: VID Ford recovery
(06-11-2018, 06:22 AM)rexercio Wrote: Hi you can you use ELMconfig (it is better to use elm327 on cable) go into PCM then Configuration and READ from PCM. Then u can adjust everything u want and save. Report if that helpsYes, of course! But i have only ELM327 WIFI. Can I do with tool? EGR | DPF | O2 | Remapping
Diagnostic & Coding BMW/VAG Online working by Teamviewer Working 24/7/365 on Worldwide |
|||
06-11-2018, 07:16 AM,
Post: #4
|
|||
|
|||
RE: VID Ford recovery
yes you can try. ur VID is already f%#ked up so give a shot. elm327 works (cable, wifi or bluetooth) but cable is stable. rest worsk but can make some problems during reading or writing.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content