[raffy haddad]

hello it should work
try it first eeprom if not work write both eeprom and flash
regards

[teuton]

The steering lock supplies votage to the ignition switch. When you disconnected the steering lock plug
you have to jumper/bridge the steering lock feed to the the ignition switch feed in that same connecter. Just have a look at the wiring diagram.... That way you should have no immo warning as well.

[punjabi13]

Hi Teuton,

I have already bridged the steering lock with ignition switch, onlt thats way lights come on my dashboard if immo is active.

in the morning when i start car i wont get immo active message at all and its shows all MFD values. only later in the day the immo active message comes....same weather issue i think....