[milkyway]

Hello!

If you know the files which are needed for a ZGW then it's easy.

For example ZGW1 (with CIC). BTL is 00000929, SWFL 0000092A and 0000092B.
Latest BTL in 4.19.30 for this ECU is btld_00000929_003_004_090 and latest swfl are swfl_0000092A_003_004_170 and swfl_0000092B_003_011_002

Use the same for ZGW2 if you like. Take care, you cannot mix any BTL and SWFL together, they should fit together - so no old BTL and new SWFL or vice versa. And some ecus have swfl dependencies (like EGS). The first and the second swfl should there also fit together.

Now you can write your own TAL and flash the ZGW without calculating any TAL. And once more, there's no need to load any svt in the TAL execution area. Ignore all old manulas for that in which this is inside.

CU Oliver

[lustek]

Hello!

If you know the files which are needed for a ZGW then it's easy.

For example ZGW1 (with CIC). BTL is 00000929, SWFL 0000092A and 0000092B.
Latest BTL in 4.19.30 for this ECU is btld_00000929_003_004_090 and latest swfl are swfl_0000092A_003_004_170 and swfl_0000092B_003_011_002

Use the same for ZGW2 if you like. Take care, you cannot mix any BTL and SWFL together, they should fit together - so no old BTL and new SWFL or vice versa. And some ecus have swfl dependencies (like EGS). The first and the second swfl should there also fit together.

Now you can write your own TAL and flash the ZGW without calculating any TAL. And once more, there's no need to load any svt in the TAL execution area. Ignore all old manulas for that in which this is inside.

CU Oliver

Is there any sheet based on we can generate this tal?
List of btl and matching swfl for model version (f10, f30 etc) Or you only based on practice?

[tschek]

You done it ? Fix it ?

[fiz_lth]

You done it ? Fix it ?

---

Nope, still not fixed. It was a hectic day today no time to even think about this F10

[tschek]

You done it ? Fix it ?

---

Nope, still not fixed. It was a hectic day today no time to even think about this F10

Your VO is right. Use this to create SVT_soll and than the TAL. 
Look in the Tall about Except Identifier, that this is right and flash only the ZGW. After flashing initial the Flexray Bus.

Or do it like Milkiway say, create your own TAL.

[lustek]

If you need latest data for ZGW2 are:

- BTLD: btld_000010F5_003_004_090
- SWFL: swfl_0000092B_005_018_000
- SWFL: swfl_000010F6_003_004_170

This data are for hardware: hwel_000010FD_000_194_000

[fiz_lth]

I give up.... is anyone willing to assist over team viewer?

[Batje]

I give up.... is anyone willing to assist over team viewer?

Send me a pm, i'll help you 

[fiz_lth]

Got it sorted, the car is running again! Thanks to Batje who go it fixed for me