[zirafin]

Halo i buy VXDIAG VCX NANO 5054A ODIS V2.0 Support UDS Protocol with Multi-languages
:http://www.vxdiag.com/wholesale/vxdiag-vcx-nano-5054a-support-uds-protocol.html

i downloaded ODIS S 2.2.6+POSTSETUP 6.70.0+MEDS+BT FIX ISO

it is possible that is not working on odis 2.2.6 and i nead only odis 2.0 ??

i installed this odis 2.2.6 and i cant connect to the ecu *( its direct connected home) vcds works ok.
thanks for all answers

[zirafin]

If i go to: extras : diagnostic interface :
i got : the following VCI is curently not selected :
vci configuration VAS5054
serial number 08430165
VCI ID : (its emty)

and if i hit button :change VCI
then thei ask to remove the diagnostic harddware Funkkopft Vas 5054 that is curent

i hit button next

after i have list of hardware :
Funkkopf VAS 5054
Vas 5055
J2534 passthru-interface

i take again funkkopf VAS 5054 . then ask me to connect new diagnostic kardware to the vechile , and hit button next.

thei start activation and fast stop ant its come same determining diagnostic interface data screen and write the following VCI is curently not selected.?????????????

---

pictures^^ of top message

[vagvag]

Hi...............
The crap interface that you bought m8 cant to work like a Vas5054A head!!!!!!!!
You need to use it and to select like J2534 passthru vci!!!!!!!!!!!!!
Regarts..........

[zirafin]

I used J2534 passthru-interface its same thing... thanks for answer

[vagvag]

I used J2534 passthru-interface its same thing... thanks for answer

If you install for your crap interface his driver and Odis still cant to recognize it then better contact with the All-SCAMMER guys.........
Regarts........

[spido]

VXDIAG works only with Odis 2.0.2.I try whit 2.2.2 ,2.2.6 and cant work whit it..