[psya]

Hey all,

I have this strange issue.

Ista 4.32.15 working perfect with ICOM.
After i lock ip and open E-SYS i have no connection with the car.

Connection Type in ESYS -ICOM/Ethernet
Error - Connection CHECK FAILED. Gateway ecu's are not correctly connected or not respoinding

Change cable to ENET cable, works perfect with Esys and ISTA.

Icom Firmware:
Current PACKAGE IMAGE version:

03.22.11
Current SYSTEM IMAGE version:
01.30.00
Current APPLICATION IMAGE version:
01.47.00

All worked beefore...It's like after all the new updates it stopped working correctly.

Any advice? Thank you.

[hicazkar]

before the connect with esys you have to unlock (reserved) the icom you can use easyconnect for lock the icom

[psya]

before the connect with esys you have to unlock (reserved) the icom you can use easyconnect for lock the icom

Well I do lock the Icom with easy connect and also tried with different things.
Icom status is reserved, in Ista, but still no connection with esys.

[hicazkar]

before the connect with esys you have to unlock (reserved) the icom you can use easyconnect for lock the icom

Well I do lock the Icom with easy connect and also tried with different things.
Icom status is reserved, in Ista, but still no connection with esys.

sent me teamviewer wth pm i can show you how to connect it

[psya]

But is there any special !?
I mean I do not think that there is smth special I need to do.
It’s not the first time I uses esys, been working for years.

[agr]

for connection you need reserve icom, and be shure vehicle ethernet available (you may check it by icom webpage)

[krug]

for connection you need reserve icom, and be shure vehicle ethernet available (you may check it by icom webpage)

no need to reserve icom