[Cstef]

Use FRSF instead of FRS. The FRSF will not request the FSC.

i have one here to , but need to change again wiring too ? 
saw a movie on yt of Malaysia how put it in to G20 idd with stop and go , 
but you say it wil work , other says no stop and go , 
I thought it works only if you have optional SAS module in the car and front Left and richt short radar SRR1 kafas4 High, driver camera option 5AU. ?

7, 8 G series, 5DF uses FRSF. You just need to code it right everything will work. SAS is needed

I don't have the SAS module . I don't even have found the oe number to buy this part ! do you have the wiring scheme ? SAS module and FRSF ?
just for looking in too it if other solution don't work .thanks in advance.

[Temnij]

No need sas for 5df. U can use scheme from g05.

[Cstef]

No need sas for 5df. U can use scheme from g05.

Ok and with use of FRSF long distance radar ? kan you send picture of scheme please For FRSF ? or can I used the connection as the FRR with additional heating connected ? id just make search on new tis and find only scheme with SAS module ? the other scheme is for basis FFR (basic) radar the same it is installed on my car.
   

[Cstef]

Use FRSF instead of FRS. The FRSF will not request the FSC.

i have one here to , but need to change again wiring too ? 
saw a movie on yt of Malaysia how put it in to G20 idd with stop and go , 
but you say it wil work , other says no stop and go , 
I thought it works only if you have optional SAS module in the car and front Left and richt short radar SRR1 kafas4 High, driver camera option 5AU. ?

7, 8 G series, 5DF uses FRSF. You just need to code it right everything will work. SAS is needed

If I can buy new SAS module , needs this sas module also have delocking code ? else I will chasing may tail and put lot off time and effort into it ? any idea ?