[laso]

I have a problem with CAFD coding after replacing the tubes. BMW X3 G01 LCI US car converted to EU. Front lamps replaced with EU. After pressing detect cafd I get a message about "no CAFD mapping for base variant FLM2 found". The flash attempt does nothing because even Esys does not update the bootloader.

[Node]

Your FA is invalid or does not match modules.

[Mwahab]

Calculate TAL and check if its correct or not.

[Node]

If you want better answers, provide ANY data we could work with... module part numbers, FA, etc.

[laso]

If you want better answers, provide ANY data we could work with... module part numbers, FA, etc.

i upload FA, SVT, TAL

I try change for EU typeschlusell, disable HW-IDs

[Node]

Your FLMs are "low" variant. NOT compatible with 552 option!!!

It WILL work when your hardware will match FA. HW-IDs have NOTHING to do with this (well HW-IDs do, the button "from actual" does NOT).

[laso]

Thank you very much for your help. Are you help me what modules should I purchase? How to recognize?

[Node]

You could remove 552 option from FA too. If you bought whole lamps, then I would say they are not AHL or LED at all (depending on what is default on G01 LCIs).