[MahoJohn]

hi,

my airbag module was water damage, i buy same ecu with same part number,
i resoldered the eprom on the new airbagmodule, after instal in car, n noticed that the diagnosis is very slow and I can ONLY read the error codes and the Aribag lamp is on, I then soldered the eeprom from the new airbag module into the new airbag module, everything works diagnostic coding...
the vin number is not correct and the coding is different with the new airbag module, can sameone help me, i upload the eeprom with water damage and the new eeprom,

thanks

[jokir]

Test and report

[MahoJohn]

Test and report

hi,

i have still same dtc:
01794 Control unit, wrong VIN

[jokir]

You have to adapt the airbag unit for audi online I think

[MahoJohn]

You have to adapt the airbag unit for audi online I think

i try with odis adapt, after adapt, car dont start, now i do immo off for engine ecu, 
but even after adapt with odis same dtc in aribag module

is very strange

---

You have to adapt the airbag unit for audi online I think

i try with odis adapt, after adapt, car dont start, now i do immo off for engine ecu, 
and now airbag module is ok,

solved thank you

is very strange