[elbiscuit]

Hi mates,

i have a bmw e61 520d 2008 with 93B2 airbag fault code.
the car had a collision and comes from another workshop,They cleaned the cash, I think everything is ok, the customer does not want to insert a new battery cable (battery crash sensor), is it possible to deactivate or eliminate this sensor?

I've already tried to install a resistance, but without good results... and I also tried with the FVDI to code the airbag, removing the "battery sensor", also without good results.
I always have the airbag light on on the display.

Can yoy help me please?

Best Regards

[renia1983]

In my experience I had some troubles with connector but not one that connects to battery cable directly but there is 2nd connector not far away (go through wires and you will get it). I had tp put resistor there to solve this error. There happens loose connection quite often.

[elbiscuit]

In my experience I had some troubles with connector but not one that connects to battery cable directly but there is 2nd connector not far away (go through wires and you will get it). I had tp put resistor there to solve this error. There happens loose connection quite often.

Thank you to your reply.

what valour of resistence do you use ?

Regards

[renia1983]

2.2ohm - like in most of cars