[zimzia]

Hello, has anyone encountered the problem of cyclical reset of Converse?, I see that the problem is quite common but there is no answer. Maybe someone can help with this problem.

Thanks BR

[Raimisklp]

problem is not common actualy. try to heat resolder micros at first

[zimzia]

It is common, just look for information, and I have 2 meters with this problem

[al70]

It's a common problem in a lot of clusters, vibration loosens the solder joints where the cable goes into the cluster, open up and reflow the solder joints on the socket where the cable plugs in, worth a try, goodluck.

[Clusters]

Also, surface mount resistors crack the solder joint due to thermal cycling. Hard to see without magnification.

Very common in some GM trucks.