Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
6WB Retrofit Issue
05-03-2024, 14:43 PM,
Post: #1
|
|||
|
|||
6WB Retrofit Issue
Hi, having issues retrofiting a 6WB to F10 pre LCI 2011. Got the cluster, read 35160, but in there i see only 2 short vin's no long vin at all. So i try to change only them and write with R270 but it wont do it, says i need to erase km first. So i try that, but it gets stuck, seems like R270 cant do it. It did something strange with the mileage it like reduced but by like 1000km, something very small. Anyways i replaced the VINs on the 35160, only the 2 short ones with 7 VIN digits. Go to car to try and code, but get WDBI_CPS error, seems like VIN is wrong or something. Could this be a damaged eeprom, or did i maybe not solder it good? Any thoughts what to do in this situation?
|
|||
05-03-2024, 21:02 PM,
Post: #2
|
|||
|
|||
RE: 6WB Retrofit Issue
R270 does not do 35160wt eeprom.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
06-03-2024, 10:02 AM,
Post: #3
|
|||
|
|||
RE: 6WB Retrofit Issue
There some differents SW Version on 35160WT. 4x 7 digit Vins, 1x 17 Digit Vin and 3x 7 digit and so on. Just search with HXD inside the dump.
But you still need the right programmer like CG PRO for example |
|||
06-03-2024, 16:27 PM,
(This post was last modified: 06-03-2024, 16:27 PM by painsage.)
Post: #4
|
|||
|
|||
RE: 6WB Retrofit Issue
Issue is fixed. 35160 wasn't soldered on completely by my mistake. I did 95320 also and all is good. Only thing is i don't get navigation info from CIC? I did VO coding on both kombi and cic. Any thoughts?
EDIT: I don't get information on where to turn left or right, where to go, on my kombi or my HUD, all is empty. |
|||
06-03-2024, 16:34 PM,
Post: #5
|
|||
|
|||
RE: 6WB Retrofit Issue
You need FDL coding on KOMBI and HU_CIC
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
06-03-2024, 17:02 PM,
Post: #6
|
|||
|
|||
RE: 6WB Retrofit Issue
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content