[dfb]

After update ISTA 4.46 Must be ediabas 7.6.0!
I have installed Ediabas 7.6.0 - BMW standart tools 2024. All fine now with ISTA 4.46
But problem with Tool32 and WinKPF not working....

Get back to all version Ediabas 7.3.0 all cool ) but ISTA 4.46 not woeking anymore
shittt
Any idea?

[bimmer71]

you may have to reapply these to registry and copy to

cd c:\windows\syswow64
regsvr32 mscomctl.ocx /S
regsvr32 msflxgrd.ocx /S
regsvr32 comdlg32.ocx /S

i start 1 1 click bmw tools script with auto detect but have yet to finish it als oauto detect x86/x64 not that anyone uses x86 , in now wit 7.6.0 have not have time to eithe grab needed file or use the 2024 installer if i get around i post any deatails , even setup inap cable advanced properties and port configuration , as i know some noobs have issues , but hope this helps for now good luck .

[duke99]

After update ISTA 4.46 Must be ediabas 7.6.0!
I have installed Ediabas 7.6.0 - BMW standart tools 2024. All fine now with ISTA 4.46
But problem with Tool32 and WinKPF not working....

Get back to all version Ediabas 7.3.0 all cool ) but ISTA 4.46 not woeking anymore
shittt
Any idea?

Hi,could you share the ediabas7.6.0 for install?thanks

[flterence]

After update ISTA 4.46 Must be ediabas 7.6.0!
I have installed Ediabas 7.6.0 - BMW standart tools 2024. All fine now with ISTA 4.46
But problem with Tool32 and WinKPF not working....

Get back to all version Ediabas 7.3.0 all cool ) but ISTA 4.46 not woeking anymore
shittt
Any idea?

Hi,could you share the ediabas7.6.0 for install?thanks

Hi

Maybe is your need 

Ediabas 7.6.0 - BMW standart tools 2024 (cartechnology.co.uk)

Best Regards