Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW_ISPI_ICOM-Next-FW_03-14-10.msi
26-08-2016, 21:20 PM,
Post: #1
inspi1981 Offline
VIP Member
******
VIP Members 		Posts: 895
Threads: 118
Threads: 118
Thanks Received: 4,705 in 363 posts
Thanks Given: 172
Joined: Feb 2014
Reputation: 2,422
BMW_ISPI_ICOM-Next-FW_03-14-10.msi
BMW_ISPI_ICOM-Next-FW_03-14-10.msi hi


Attached Files
BMW_ISPI_ICOM-Next-FW_03-14-10.txt
File Type: .txt
Downloaded: 145 times
Size: 142 bytes

Reputation: +13 - simonchs [+1] , jirkon [+1] , starML [+1] , Dirchik [+1] , Twoone [+1] , tunning-gsm [+1] , Jumper [+1] , hsuchiawen [+1] , Paul [+1] , Sour [+1] , tste1982 [+1] , Cowboy [+1] , ExpertAuto [+1]
Quote this message in a reply
[+] 32 users say Thank You to inspi1981 for this post
27-08-2016, 11:13 AM,
Post: #2
Bimmeristi Offline
Donator
******
Donators 		Posts: 840
Threads: 96
Threads: 96
Thanks Received: 615 in 183 posts
Thanks Given: 429
Joined: Nov 2013
Reputation: 292
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
How this should installing? Any howto....
                                                               
Was I helpful? Please support my time and Hit [Image: tyl_add.png]  And [Image: postbit_reputation.gif] -button's.

NEW Trasdata 9 Master support Bosch SM(service mode) etc enjoy
Quote this message in a reply
27-08-2016, 12:48 PM,
Post: #3
Bimmer540 Offline
VIP Member
******
VIP Members 		Posts: 2,801
Threads: 309
Threads: 309
Thanks Received: 1,188 in 546 posts
Thanks Given: 1,807
Joined: May 2015
Reputation: 365
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
1. Please make sure that:
1.1. The ICOM is connected to a vehicle.
1.2. The ignition is ON.
1.3. The ICOM and the ISTA devices are in the same subnet.
2. Open ISTA.
3. Click on "Operations".
4. In the symbol bar at the top of the window click on the "Connection manager" button (next to the spanner symbol).
5. Select the ICOM with the status "Firmware" and click on the "Configure vehicle interface" button.
6. The ICOM will be updated.
7. After the update, the ICOM status will change to "Free". It can be used normally.
Quote this message in a reply
[+] 6 users say Thank You to Bimmer540 for this post
27-08-2016, 14:38 PM,
Post: #4
Bimmeristi Offline
Donator
******
Donators 		Posts: 840
Threads: 96
Threads: 96
Thanks Received: 615 in 183 posts
Thanks Given: 429
Joined: Nov 2013
Reputation: 292
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
(27-08-2016, 12:48 PM)snypertje Wrote:  1. Please make sure that:
1.1. The ICOM is connected to a vehicle.
1.2. The ignition is ON.
1.3. The ICOM and the ISTA devices are in the same subnet.
2. Open ISTA.
3. Click on "Operations".
4. In the symbol bar at the top of the window click on the "Connection manager" button (next to the spanner symbol).
5. Select the ICOM with the status "Firmware" and click on the "Configure vehicle interface" button.
6. The ICOM will be updated.
7. After the update, the ICOM status will change to "Free". It can be used normally.

Tried that. Now ICOM status is "free", not "firmware" as should? I have setup that .msi all ready, so it should be istalled. Not understand what i do wrong.
                                                               
Was I helpful? Please support my time and Hit [Image: tyl_add.png]  And [Image: postbit_reputation.gif] -button's.

NEW Trasdata 9 Master support Bosch SM(service mode) etc enjoy
Quote this message in a reply
27-08-2016, 19:40 PM,
Post: #5
Jynkky Offline
Member
Members 		Posts: 114
Threads: 5
Threads: 5
Thanks Received: 41 in 17 posts
Thanks Given: 150
Joined: Feb 2014
Reputation: 11
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
(27-08-2016, 14:38 PM)Bimmeristi Wrote:  
(27-08-2016, 12:48 PM)snypertje Wrote:  1. Please make sure that:
1.1. The ICOM is connected to a vehicle.
1.2. The ignition is ON.
1.3. The ICOM and the ISTA devices are in the same subnet.
2. Open ISTA.
3. Click on "Operations".
4. In the symbol bar at the top of the window click on the "Connection manager" button (next to the spanner symbol).
5. Select the ICOM with the status "Firmware" and click on the "Configure vehicle interface" button.
6. The ICOM will be updated.
7. After the update, the ICOM status will change to "Free". It can be used normally.

Tried that. Now ICOM status is "free", not "firmware" as should? I have setup that .msi all ready, so it should be istalled. Not understand what i do wrong.


Do u already have latest fw on your icom?
handshake If my post helped you hit the thanks and reputation button handshake
Quote this message in a reply
27-08-2016, 19:54 PM,
Post: #6
Bimmeristi Offline
Donator
******
Donators 		Posts: 840
Threads: 96
Threads: 96
Thanks Received: 615 in 183 posts
Thanks Given: 429
Joined: Nov 2013
Reputation: 292
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
(27-08-2016, 19:40 PM)Jynkky Wrote:  
(27-08-2016, 14:38 PM)Bimmeristi Wrote:  
(27-08-2016, 12:48 PM)snypertje Wrote:  1. Please make sure that:
1.1. The ICOM is connected to a vehicle.
1.2. The ignition is ON.
1.3. The ICOM and the ISTA devices are in the same subnet.
2. Open ISTA.
3. Click on "Operations".
4. In the symbol bar at the top of the window click on the "Connection manager" button (next to the spanner symbol).
5. Select the ICOM with the status "Firmware" and click on the "Configure vehicle interface" button.
6. The ICOM will be updated.
7. After the update, the ICOM status will change to "Free". It can be used normally.

Tried that. Now ICOM status is "free", not "firmware" as should? I have setup that .msi all ready, so it should be istalled. Not understand what i do wrong.


Do u already have latest fw on your icom?

Hmmm. For what ICOM model this firmware is? Is this for ICOM NEXT only?!?!? My ICOM is A2. And firmware is xxxx .03 ending.....
                                                               
Was I helpful? Please support my time and Hit [Image: tyl_add.png]  And [Image: postbit_reputation.gif] -button's.

NEW Trasdata 9 Master support Bosch SM(service mode) etc enjoy
Quote this message in a reply
27-08-2016, 21:42 PM,
Post: #7
ruben_17non Offline
VIP Member
******
VIP Members 		Posts: 1,220
Threads: 118
Threads: 118
Thanks Received: 2,562 in 420 posts
Thanks Given: 1,601
Joined: Jul 2014
Reputation: 806
RE: BMW_ISPI_ICOM-Next-FW_03-14-10.msi
(27-08-2016, 19:54 PM)Bimmeristi Wrote:  
(27-08-2016, 19:40 PM)Jynkky Wrote:  
(27-08-2016, 14:38 PM)Bimmeristi Wrote:  
(27-08-2016, 12:48 PM)snypertje Wrote:  1. Please make sure that:
1.1. The ICOM is connected to a vehicle.
1.2. The ignition is ON.
1.3. The ICOM and the ISTA devices are in the same subnet.
2. Open ISTA.
3. Click on "Operations".
4. In the symbol bar at the top of the window click on the "Connection manager" button (next to the spanner symbol).
5. Select the ICOM with the status "Firmware" and click on the "Configure vehicle interface" button.
6. The ICOM will be updated.
7. After the update, the ICOM status will change to "Free". It can be used normally.

Tried that. Now ICOM status is "free", not "firmware" as should? I have setup that .msi all ready, so it should be istalled. Not understand what i do wrong.


Do u already have latest fw on your icom?

Hmmm. For what ICOM model this firmware is? Is this for ICOM NEXT only?!?!? My ICOM is A2. And firmware is xxxx .03 ending.....

Yes only for ICOM NEXT for ICOM A1 or A2:
http://cartechnology.co.uk/showthread.php?tid=17808
Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ruben_17non for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,835 05-02-2024, 23:47 PM
Last Post: vagrom
XZBMW BMW_ISPI_ICOM-FW_03-23-10 & ICOM-Next-FW_04-23-10 shawnsheridan 0 591 25-04-2023, 02:54 AM
Last Post: shawnsheridan
XZBMW ICOM-FW_03-22-21 & ICOM-Next-FW_04-22-21 shawnsheridan 6 1,141 23-03-2023, 07:21 AM
Last Post: xsashox
  Is BMW_ISPI_ICOM-Next-FW_03-14-10 still up to date? M-Simon 2 750 08-03-2017, 12:47 PM
Last Post: ruben_17non
XZBMW BMW_ICOM-FW_03-14-04.msi (ICOM A1/A2) ruben_17non 7 2,903 11-09-2016, 16:39 PM
Last Post: BMWzone
XZBMW [SOLVED] ICOM-NEXT-FW_03-14-10 Bimmer540 4 1,577 25-08-2016, 13:59 PM
Last Post: Jynkky

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content