[BB-Driver]

Hi today coded an F12 650i 2011 from US > ECE
Car has now ECE headlights and taillights and a new lightswitch for the foglight.
I coded Kombi CIC and FRM. Everything work but now the turnsignals in the fenders are on with the drl.
How I can turn them off?


Gesendet von iPhone mit Tapatalk

[rTs]

Just compare cafd of EU coding and USA coding, You will see difference which need to be changed to set off fenders with drl

[BB-Driver]

Just compare cafd of EU coding and USA coding, You will see difference which need to be changed to set off fenders with drl

U_EFF_1_SL was the problem set it to 00 and solved the problem

[buzzy]

Just compare cafd of EU coding and USA coding, You will see difference which need to be changed to set off fenders with drl

U_EFF_1_SL was the problem set it to 00 and solved the problem

It has helped, but turnsignals didn`t work on sides at all.
Have tried to code half codings from ECE, half fron US, didn`t help..
Do you have any suggestion?

[kmodel99]

One of these values is for this. I think first one, need change to 00 (left).

U_EFF_1_SL Left: wert_09__aus = 00 Right: wert_01__100% = 32
BL1_DEAKTIVIERT_BEI_SL2_DEFEKT Left: nicht_aktiv = 00 Right: aktiv = 01
FH_USA_REVERSIERWEG Left: aktiv = 01 Right: nicht_aktiv = 00