[jakesvw]

ObdReadOriginal.rar
File Type:
Downloaded:	10 times
Size:	92.58 KB

can some one do a tune for this iveco With EDC16c8 3.0 16 Valve , i need better fuell consumption but more power , it os NOT fitted with dpf or egr , straight forward
read with galleto over OBD

BOSCH EDC16/EDC16C8
0281 011 228
8-1.31 MPC55
30.07.2003
4Z.07-09-0608-09-06.
1037367762
1037366670
.Z.p_315 E3/
.Z.11.1.6 v4B,..

[gmon16]

Your stage 1 file
Pass PM

[jakesvw]

thanx m8 i will load and test but i got this from other tuner , he say to me ""does the vehicle run ok with this sw? 1037370676. It does not match the ID you post"""

long story short , i got tuned file for this ecu and load it , then ecu dead no coms nothing , i solder another flash into ecu and load the original file back to ecu , now it is alive , so i will surley test this file and report but will not be soon

[8baller]

You post ID:

1037367762
1037366670

You post "obdreadoriginal.rar" with sw: 1037370676

he say to me ""does the vehicle run ok with this sw? 1037370676. It does not match the ID you post""

you can see, the sw, they do not match, so you have solder different sw flash into the ecu, hence the question, "does the vehicle run ok?"

[jakesvw]

ok some feedback
tested it today with a test box on the car
1 it start better
2 no smoke
3 it accelerate smooth from thebegiining NO turbo lag on it and best part NO black smoke
4 i could get on the normal route in to 6 gear but had to go back to 5 th gear at some point , but with your file i did drive all the way in 6th gear no smoke
only one thing i need but i do not think you will be able to tune a 7 and 8 gear into the file
Verry nice thanx m8