Possibly Related Threads…

***ns79*** · 30-08-2019, 14:09 PM,

(30-08-2019, 13:52 PM)rch11 Wrote: But in the system did you desolder the memory?

I have not, like many times so far, done the same Valeo BSI with in board reading. I've never had a problem before.

***volavka*** · (This post was last modified: 30-08-2019, 15:01 PM by volavka.)

(30-08-2019, 14:09 PM)ns79 Wrote: I have not, like many times so far, done the same Valeo BSI with in board reading. I've never had a problem before.

I see there a corrupted byte at Pin code area

Give a try this file .. if start ok let me know to correct km

***ns79*** · (This post was last modified: 31-08-2019, 08:58 AM by ns79.)

(30-08-2019, 14:38 PM)volavka Wrote:
(30-08-2019, 14:09 PM)ns79 Wrote: I have not, like many times so far, done the same Valeo BSI with in board reading. I've never had a problem before.

I see there a corrupted byte at Pin code area

Give a try this file .. if start ok let me know to correct km

Hi Volavka,

cannot also start with this fix file sad

Is it possible to find the original file and do it immo off?

(30-08-2019, 14:38 PM)volavka Wrote:
(30-08-2019, 14:09 PM)ns79 Wrote: I have not, like many times so far, done the same Valeo BSI with in board reading. I've never had a problem before.

I see there a corrupted byte at Pin code area

Give a try this file .. if start ok let me know to correct km

Hi again Volavka,

I found a dump from the same BSI Valeo 96 645 325 80 only from another car, can I put that file and do it immo off?

Thank you

***ns79*** · 01-09-2019, 15:07 PM,

(30-08-2019, 14:38 PM)volavka Wrote:
(30-08-2019, 14:09 PM)ns79 Wrote: I have not, like many times so far, done the same Valeo BSI with in board reading. I've never had a problem before.

I see there a corrupted byte at Pin code area

Give a try this file .. if start ok let me know to correct km

Resolved that the car start again, with Virgin file BSI and Lexia configuration. smile

I will read the BSI again later, so if you can re-calculate miles in the current BSI file, I'd be very grateful to you smile

Regards

Neven

***ns79*** · 01-09-2019, 16:30 PM,

Here is the new BSI file. Please 137.000 km.

Thank you

***ns79*** · 01-09-2019, 21:50 PM,

Solved. I learned how to work with Nyo 4.0 and solved everything myself. The dashboard needed V3 and swap bytes. And in BSI service history and V3. After that the configuration of BSI and everything else with Lexia, because otherwise the engine cannot start.

Thank you all for your help.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	peogeot 508 magneti marelli dashboard 95160 help	rumbata851	1	16	1 hour ago Last Post: Clusters
	W907 Sprinter mileage via SMOK and VVDI	MihaiC	0	21	Yesterday, 21:31 PM Last Post: MihaiC
	Audi A3 8P FL Dashboard Swap	tehfalcon	2	31	Yesterday, 15:37 PM Last Post: tehfalcon
	FORD EDC17C70 MILEAGE	victorysatgr	2	31	Yesterday, 11:53 AM Last Post: victorysatgr
	lexus ux 250 2021 milage correction	kuki88	1	33	Yesterday, 09:33 AM Last Post: kuki88
	Peugeot 207 dashboard cluster pinout	Batru	2	46	03-06-2024, 18:21 PM Last Post: Batru
	Boxster 981 Mileage correction	Chady_101	0	8	03-06-2024, 15:13 PM Last Post: Chady_101
	W639 Viano 2008 EIS and IC mileage	mefistofilos	9	165	03-06-2024, 14:34 PM Last Post: Dravil
	Renault Traffic 2019 EDC17C84 mileage	motor25	2	42	03-06-2024, 14:08 PM Last Post: motor25
	Ktm Duke mileage	konradzd	1	19	03-06-2024, 13:23 PM Last Post: Clusters

Contact Us