Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
After retrofit 6WB , AhM fault
19-02-2022, 12:02 PM,
Post: #1
|
|||
|
|||
After retrofit 6WB , AhM fault
I have a problem after replacing 6WB, I have fault a trailer module.
ISTA shows error „No massage (display, check control bypass 02, 0x329) receiver Kombi, AHM transmitter. „ Car is F30 pre LCI equipped with NBT EVO. AHM is from the pre-lift model, i.e. there are two trailer modules !!!MGU Virgin and Custom FSC!!!
EVO ENTRYNA2 FSC Remote 8HP Reset Kafas 4 Virgin If I help press rep and THX |
|||
19-02-2022, 14:39 PM,
Post: #2
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
you coded your kombi incorrect.
MGU(ID7, ID8) Patching/Virginizing.
Feature Installer codes. KAFAS4 Virginizing. Physical head unit Repairs. CarPlay activations(EVO,ENAV2,MGU). Remote BMW Coding. [email protected] |
|||
05-04-2022, 14:50 PM,
Post: #3
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is
E11505 No massage (display, check control bypass 02, 0x329) receiver Kombi, transmiter " and the hitch fault appear on dashboard. So , did you find the solution at your problem. If I helped you press magic buttons
|
|||
05-04-2022, 15:38 PM,
Post: #4
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
Solution is easy, just code cluster without trailer in FA.
|
|||
05-04-2022, 15:56 PM,
Post: #5
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?
If I helped you press magic buttons
|
|||
05-04-2022, 16:12 PM,
Post: #6
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
05-04-2022, 16:27 PM,
Post: #7
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 16:12 PM)PsevDo Wrote:(05-04-2022, 15:56 PM)pepi Wrote: So , I remove 3AC from FA , code cluster then set back 3AC to FA and I do not code cluster - is that it?code only cluster without 3ac Thanks for replay. Should I do it like I say or do it with FDL editing . On FDL cant find where to disable . If I helped you press magic buttons
|
|||
05-04-2022, 18:05 PM,
Post: #8
|
|||
|
|||
RE: After retrofit 6WB , AhM fault
(05-04-2022, 14:50 PM)pepi Wrote: I have the same issue , retrofitted 6WB on F30 ,injected CAFD for KOMBI , coded all other modules to default after changed VO to 6WB and the only fault code is Simply FDL code the 6WB instrument cluster. Set the following parameters to "nicht_aktiv":
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content