Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ BMW f30 ,276F00 Electronic immobiliser. No authentic response received
26-10-2022, 15:08 PM,
(This post was last modified: 26-10-2022, 15:09 PM by amine0xff.)
Post: #1
|
|||
|
|||
BMW f30 ,276F00 Electronic immobiliser. No authentic response received
Hello,
i have f30 with dead FEM, so i picked an used FEM,read ISN form new one write it in DDE, programmed the keys the car crank but no start i get this error from DDE 276f00 no authentic response received i forget to mention that i coded the new FEM with my FA |
|||
26-10-2022, 15:46 PM,
Post: #2
|
|||
|
|||
RE: BMW f30 ,276F00 Electronic immobiliser. No authentic response received
(26-10-2022, 15:08 PM)amine0xff Wrote: Hello, I think it was a mistake to change the dde isn. If the transmission is automatic, it will also have an isn that must match as well. It is better to change the isn inside the FEM. Read the dde isn & write it to the FEM. After updating the FA, did you check if software in FEM is correct? |
|||
26-10-2022, 15:46 PM,
Post: #3
|
|||
|
|||
RE: BMW f30 ,276F00 Electronic immobiliser. No authentic response received
What about egs?make new fem and rewrite key
|
|||
26-10-2022, 15:53 PM,
Post: #4
|
|||
|
|||
RE: BMW f30 ,276F00 Electronic immobiliser. No authentic response received
EGS is not a problem right now i will fix it later,
but right now ISN of FEM and DDE are correct i think i need to update software of FEM, should i do that with Ista ? |
|||
27-10-2022, 13:23 PM,
Post: #5
|
|||
|
|||
RE: BMW f30 ,276F00 Electronic immobiliser. No authentic response received
just for details , i restored the original ISN from ECU, write it in FEM ,and car started
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content