[voytek]

Hi,

Car is Peugeot 307 1.6 petrol. Owner tried to replace BSI by himself. Car has 101 000 km original mileage. After mounting used BSI dash shows about 340 000 km now.
Dash is with nec inside. I don't have tool to read/write it.
BSI is Siemens with 95160 eep. I have cleared it and coded to the car. Telecoding done also. It starts and works.
I need to change mileage to 101 000 km. Possible to wirte 1 101 000 km to the BSI so dash will show 101 000 km?

[cfocosta]

Hi,

Car is Peugeot 307 1.6 petrol. Owner tried to replace BSI by himself. Car has 101 000 km original mileage. After mounting used BSI dash shows about 340 000 km now.
Dash is with nec inside. I don't have tool to read/write it.
BSI is Siemens with 95160 eep. I have cleared it and coded to the car. Telecoding done also. It starts and works.
I need to change mileage to 101 000 km. Possible to wirte 1 101 000 km to the BSI so dash will show 101 000 km?

Hi!

I convert your eeprom file to 101000 km.
You could try to test the file.

The issue is the ECU and panel (dashboard), because the owner replace a BSI with high mileage. You should convert the panel (dashboard) and ECU with a 101000 km first, before place the BSI.

I hope you have success.

Thanks and a Happy New Year too.

Carlos Frederico Costa

[voytek]

Hi,

Car is Peugeot 307 1.6 petrol. Owner tried to replace BSI by himself. Car has 101 000 km original mileage. After mounting used BSI dash shows about 340 000 km now.
Dash is with nec inside. I don't have tool to read/write it.
BSI is Siemens with 95160 eep. I have cleared it and coded to the car. Telecoding done also. It starts and works.
I need to change mileage to 101 000 km. Possible to wirte 1 101 000 km to the BSI so dash will show 101 000 km?

Hi!

I convert your eeprom file to 101000 km.
You could try to test the file.

The issue is the ECU and panel, because the owner replace a BSI with high mileage. You should convert the panel and ECU with a 101000 km first, before place the BSI.

I hope you have success.

Thanks and a Happy New Year too.

Carlos Frederico Costa

Thank you and a Happy New Year too!
ECU is ME7.4.4 - can you set it to 101000km too?
I upload eep

[cfocosta]

Hi,

Car is Peugeot 307 1.6 petrol. Owner tried to replace BSI by himself. Car has 101 000 km original mileage. After mounting used BSI dash shows about 340 000 km now.
Dash is with nec inside. I don't have tool to read/write it.
BSI is Siemens with 95160 eep. I have cleared it and coded to the car. Telecoding done also. It starts and works.
I need to change mileage to 101 000 km. Possible to wirte 1 101 000 km to the BSI so dash will show 101 000 km?

Hi!

I convert your eeprom file to 101000 km.
You could try to test the file.

The issue is the ECU and panel, because the owner replace a BSI with high mileage. You should convert the panel and ECU with a 101000 km first, before place the BSI.

I hope you have success.

Thanks and a Happy New Year too.

Carlos Frederico Costa

Thank you and a Happy New Year too!
ECU is ME7.4.4 - can you set it to 101000km too?
I upload eep

Hi!

Now you have a serious issue. From what I know, the main devices are the dashboard and BSI. It is possible that the dashboard is altered with the new value of mileage. I do not know the type of dashboard is yours.

Perhaps someone, in the forum, knows how to change the mileage of the dashboard.

Sorry for not helping you with the dashboard.

Carlos Frederico Costa

[voytek]

Hi,

Car is Peugeot 307 1.6 petrol. Owner tried to replace BSI by himself. Car has 101 000 km original mileage. After mounting used BSI dash shows about 340 000 km now.
Dash is with nec inside. I don't have tool to read/write it.
BSI is Siemens with 95160 eep. I have cleared it and coded to the car. Telecoding done also. It starts and works.
I need to change mileage to 101 000 km. Possible to wirte 1 101 000 km to the BSI so dash will show 101 000 km?

Hi!

I convert your eeprom file to 101000 km.
You could try to test the file.

The issue is the ECU and panel, because the owner replace a BSI with high mileage. You should convert the panel and ECU with a 101000 km first, before place the BSI.

I hope you have success.

Thanks and a Happy New Year too.

Carlos Frederico Costa

Thank you and a Happy New Year too!
ECU is ME7.4.4 - can you set it to 101000km too?
I upload eep

Hi!

Now you have a serious issue. From what I know, the main devices are the dashboard and BSI. It is possible that the dashboard is altered with the new value of mileage. I do not know the type of dashboard is yours.

Perhaps someone, in the forum, knows how to change the mileage of the dashboard.

Sorry for not helping you with the dashboard.

Carlos Frederico Costa

It is eeprom from ECU - Bosch ME7.4.4

[bodzio012]

Peugeot 307  enaugh dash+bsi (ECU is not need)
But when you change on BSI mileage you need to change on dash too.
If you don't have a programmer try the same method as dash NEC+hc12.
There IT is enaugh change on BSI and dash connect to power for 1 minut.