[CATAHA]

ICOM firmware
Works on clone and OEM

Please note that the IP will change after the update.
http://169.254.58.8:60080/ (IN OTHER CASES, CHECK YOUR IP FIRST)
http://169.254.92.38:60080/ (IN MY CASE. CHECK YOUR IP FIRST)
LOG IN with following Username and Password
USRNM root
PWD NZY11502

On main screen select Update Firmware
The Select SYSTEM
Then Browse
Then Browse for you downloaded ICOM-BootImage-01-23-01.bin(IN MY CASE)
Double click or select ICOM-BootImage-01-23-01.bin and then click open
Then Press Send the file
On next screen Press Yes
Then wait
Once BootImage been Flashed DO NOT SELECT OR PRESS ON REBOOT
Click on Update Firmware
Select APPLICATION
Then Press Browse button
and locate ICOM-ApplicationImage-01-37-00.bin(IN MY CASE)
Select and press open
Then Press Send File
On next screen press YES button
and wait
Once Done select Reboot
Then wait
Then navigate to
http://169.254.58.8:60080/ (IN OTHER CASES, CHECK YOUR IP FIRST)
http://169.254.92.38:60080/ (IN MY CASE. CHECK YOUR IP FIRST)
Go too Update Firmware
and check too see if SYSTEM IMAGE and APPLICATION IMAGE changed Version numbers
If yes then YOU ARE DONE

[CATAHA]

Thank you that has really helped me

That's why we are here for...
Learn, Try, Share

[damascus7]

Did it lately with success. Been very scared during flashing process but with a big smile at the end.