Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista 4.25.40 does not work with Motorbikes
|
18-04-2023, 06:54 AM,
Post: #1
|
|||
|
|||
|
Ista 4.25.40 does not work with Motorbikes
My ista with version 4.25.40 does work on cars well but not on motorbikes.
On an older laptop with 4.02.22 its working very well This is the error on 4.25.40 |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
18-04-2023, 07:03 AM,
Post: #2
|
|||
|
|||
|
RE: Ista 4.25.40 does not work with Motorbikes
Have you switched it to motorrad mode in settings???
|
|||
|
|
|
18-04-2023, 07:06 AM,
Post: #3
|
|||
|
|||
|
RE: Ista 4.25.40 does not work with Motorbikes
The previous version was not able to identify BN2000 motorcycles!
It was a known bug! Vojnó
Press Thanks and reputation  if this post helped you. |
|||
|
|
|
18-04-2023, 17:09 PM,
(This post was last modified: 18-04-2023, 17:10 PM by autoraedarum.)
Post: #4
|
|||
|
|||
|
RE: Ista 4.25.40 does not work with Motorbikes
|
|||
|
|
|
19-04-2023, 03:54 AM,
Post: #5
|
|||
|
|||
|
RE: Ista 4.25.40 does not work with Motorbikes
BN2000 are older bikes with a ZFE control unit. They had to be updated with ISTA/P but diagnostic with ISTA.
|
|||
|
|
![[Image: XYHzAk1.png]](https://i.imgur.com/XYHzAk1.png)
|
19-04-2023, 08:48 AM,
Post: #6
|
|||
|
|||
RE: Ista 4.25.40 does not work with Motorbikes
(18-04-2023, 17:09 PM)autoraedarum Wrote:(18-04-2023, 07:03 AM)Node Wrote: Have you switched it to motorrad mode in settings??? I have already described it so many times, but the attached table clarifies everything! By definition, the "Programming system" specifies which ISTA os ISTA/P and this shows which handeld with NCS os E-sys!  ISTA (+) programming = NCS/Winkfp (BN200 or earlier) ISTA/P = E-sys (BN2020) |