[bboctavian]

Hello, i have a bmw e60 with nbt evo retrofited and reverse camera, all work ok, i put in the mirros camera for 360.

The ecu of camera is from bmw f10 with 5 camera.

What need to codet on nbt to work the 360 manually, now i can see ok nbt 360 but says: camera failure, but reverse camera still work. Thanks

[maxwell4321]

You will get errors until you calibrate the cameras with ISTA

[bboctavian]

And how i can calibrate on e60 ?

[alexnaoumov]

Install zgw and read out car with ista maybe over obd?

[muhammed78540]

install mirror and bench and calibrate NBT EVO with mirror with bench on car directly

[Mwahab]

No, the error is related to coding parameters.
Double check @ CAMERA_SYSTEM is set to TRSVC and sometimes watchdog for RV is off.

[bboctavian]

Yes is set to TRSVC, i will check and about watchdog

[bboctavian]

Hello, sorry for revive this post.

I manage to solve the problem about camera, just put the ecu on a bmw f10 car and recode again, after that the camera work

I have only one small problem, when i put in reverse it show me all the time rear camera, not 360 camera… what i need to code to show 360 camera and not just the rear one. Thanks