[Carremapper]

Hi!

With both solution with Swiftec & DaVinci Deluxe the car is in limp without having any relevant DTCs, so I'm rather looking for manual solution.

Peugeot 4007 2.2HDi 4HN 115kW 2008 (it's like Mitsu Outlander, etc.)
EDC16CP39
0281013666
391747

It has some basic DTCs like: P0470, P0473, P1447.

Thank you in advance!

EDC16_MPC564_M58BW016_ext_1037391747C59060B-20231220-164443.rar
File Type:
Downloaded:	8 times
Size:	344.24 KB

[koyot]

M58BW016_ext_1037391747C59060B-20231220-164443_dpf ok.rar
File Type:
Downloaded:	6 times
Size:	344.21 KB

resset dpf strateg

[Carremapper]

resset dpf strateg

Thanks, however this is a solution which I've already tried, both (Swiftec & Davinci Deluxe) used almost the same strategy with that one switch. I made DPF reset before (every time), but the counters for DPF clogging, etc. are still going on and counting with this, moreover the car is in limp without DTCs. 

Do you have maybe any further idea?

[YGRemaps]

resset dpf strateg

Thanks, however this is a solution which I've already tried, both (Swiftec & Davinci Deluxe) used almost the same strategy with that one switch. I made DPF reset before (every time), but the counters for DPF clogging, etc. are still going on and counting with this, moreover the car is in limp without DTCs. 

Do you have maybe any further idea?

Maybe problem was not in dpf maybe injector or somthing other

[Carremapper]

resset dpf strateg

Thanks, however this is a solution which I've already tried, both (Swiftec & Davinci Deluxe) used almost the same strategy with that one switch. I made DPF reset before (every time), but the counters for DPF clogging, etc. are still going on and counting with this, moreover the car is in limp without DTCs. 

Do you have maybe any further idea?

Maybe problem was not in dpf maybe injector or somthing other

That's also possible, however there is no any single bullshit DTC switched off (so I should have seen if there is any other issue with the engine itself, which couses the limp), also the counters are still alive regarding DPF functionality, which is not always a problem, but I would think of a correlation between the unexpected, continous limp & counting DPF parameters on diag. Nevertheless, if both software should have been working, I will start to search for any other possibility to find out what's limiting.