[giiintas]

For stage 1 no need to adjust gearbox

I don't know which stage it was, stage 1 or stage 2, I can't find out anything here even though I made a full backup. I have a problem with the gearbox - there is a jerk between 2nd and 3rd gear.
That's why I want to check what was done in my map, but everyone says something different. one that the map is original, the second that the dpf was turned off and the third that everything was changed. I guess everyone sees a different map 

u have stg1 dpf egr all of and dtc off drivers wish map set to 1000nm

also gearbox limiter 1000nm

[DavidT]

For stage 1 no need to adjust gearbox

I don't know which stage it was, stage 1 or stage 2, I can't find out anything here even though I made a full backup. I have a problem with the gearbox - there is a jerk between 2nd and 3rd gear.
That's why I want to check what was done in my map, but everyone says something different. one that the map is original, the second that the dpf was turned off and the third that everything was changed. I guess everyone sees a different map 

lets evrybody alone, they check with davinci dpf lol

[L4ykTuning]

file has tuning dpf egr off, if need original tell, regards!

[AK_Service]

For stage 1 no need to adjust gearbox

I don't know which stage it was, stage 1 or stage 2, I can't find out anything here even though I made a full backup. I have a problem with the gearbox - there is a jerk between 2nd and 3rd gear.
That's why I want to check what was done in my map, but everyone says something different. one that the map is original, the second that the dpf was turned off and the third that everything was changed. I guess everyone sees a different map  

u have stg1 dpf egr all of and dtc off drivers wish map set to 1000nm
also gearbox limiter 1000nm

ok, thank you for your answer, so tell me, approximately how HP is this map made? ~ 400HP ?
Can you turn DTC ON? I wonder why someone turned them off? all DTCs are off? the whole board?

I would need someone to do two things:
1) turn on the DTC (then I will check what errors the car has, and possibly turn off only a few)
2) set the mileage in the eeprom file to 224345 or 0 km
thank you very much for help

What cheap device can I use to do a full TCU reading, NVF/ 0BK / AL551 gearbox
Is there mileage in it? I have to check/change it
What can I do to do this? any cheap tool?
I have clones kess, ktag, sm2 pro, vcp, odis, programmer upa-usb
  won't they do it?