[hulahans]

Dhcpsrv is not for using with a separate router in my example, it emulate a router, so that you have no need for a separate router.
I only use this way , i have no idea how to configurate a separate router together with dhcpsrv, because i have no need.

[Lpapp]

Hello!

I flashed several F10,F20 with 3.56.4 and ICOM A2 through dhcp and its working well.
MOST connection will be used in Exx series, i flashed also some R56 and many E91 with most connection.

Do you use ICOM A2 or A? Flashing MOST is possible only via LAN, no possible to flash about original wifi, its noticed in some technical documents for ista p.

---

P.S. many thanks for hulahans help for configuration.

[winter]

Dear hulahans:

I didn't use a seperate rounter and dhcpscr simutiniously.only for software "dhcpsvr 2.5.0.0" to test.it couldn't solve this MOST issue.
so,could you help me to correctly configurate dhcpwiz,see your PM.thanks!

Dear Lpapp:

This issue is relational with i-level,my car is MY 2013,and if your car is above the limited i-level,so you can programming MOST by ICOM ok.

To All member:
I tried connected a Wireless rounter,but "ICOM A2-rounter-LAN" connnection is good for MOST programming,"ICOM A2-rounter-WiFi" connnection is failed for it,What's different for allocating IP to two modes?thanks.

[hulahans]

Ok Winter ,so upload the ini file from dhcpsrv ,or copy text that is inside, here.
I will compare with my one.

[Gatsby79]

No way to update them with icom? how ista-p can done it? why e-sys need enet cable?

[winter]

Ok Winter ,so upload the ini file from dhcpsrv ,or copy text that is inside, here.
I will compare with my one.

Dear hulahans:

Please see your PM.thanks in advance.

[hulahans]

I have forgotten in pn, wlan on laptop has to be off

[winter]

I have forgotten in pn, wlan on laptop has to be off

Dear hulahans:

I made a connection like this:OBD connecter-ICOM A2-LAN cable-wireless rounter.

1.then first time connected a LAN cable from LAN port to computer,so a F30 programming MOST ok;

2.the second time WiFi connected to computer,ISTA/P can execute the measure plan,but MOST modules were failed to programming yet.

So my question is What's difference about IP assigned with LAN and wifi connection?thanks.

[hulahans]

Sorry, don t know

[srki7]

For the Error in NBT and Kombi - just make a Batterie RESET and Flash it one more time - than works.