[mxfabi1]

Hi everybody,

i bought an Icom Next, connected with my Laptop ( Windows 10 64bit), all fine.

Firmware on the Icom is: 3.14.04

My Problem is, when i connected the Icom B (Most Interface) to the icom next and car, the "System" Led is green. But the "Most" Led is blinking red?

I have no Most Connection. Ista/P write: No Most Interface Connection. I can/t programm my Car
Ista/P Version 3.60

Ista/D 4.02 works perfect.

In the Icom Manager / Device Information, the Icom B in the list: attached Devices (look at the Picture) The Status connect/disconnect is ok..

Can i have a false Network Setting, or the Icom B Interface is broken?
Or i must updating the Icom Next to 3.14.10?

What is the Problem?

Who can help me please?

Best Regards Fabian

[IM6]

If you Firmware is Ok
You have problem with MOST connector

I replace 3 MOST connector (china product )

Try
I don think ISTA-P problem

[mxfabi1]

Thanks, can i use a oem most connector for clone Icom? For testing?

[SweetBMW]

Yes u can. Also you can try different Usb cable

[mxfabi1]

The usb cable is ok. I try it.

I look for a other icom B for testing.

Thanks

[freeman2010]

Hi everybody,

i bought an Icom Next, connected with my Laptop ( Windows 10 64bit), all fine.

Firmware on the Icom is: 3.14.04

My Problem is, when i connected the Icom B (Most Interface) to the icom next and car, the "System" Led is green. But the "Most" Led is blinking red?

I have no Most Connection. Ista/P write: No Most Interface Connection. I can/t programm my Car
Ista/P Version 3.60

Ista/D 4.02 works perfect.

In the Icom Manager / Device Information, the Icom B in the list: attached Devices (look at the Picture) The Status connect/disconnect is ok..

Can i have a false Network Setting, or the Icom B Interface is broken?
Or i must updating the Icom Next to 3.14.10?

What is the Problem?

Who can help me please?

Best Regards Fabian

for me there is no icom next yet it just with pcb of icom a2

[mxfabi1]

And what is the result of this?

Does the icom a2 no work with Ista/P v 3.60?

[Bimmer540]

And what is the result of this?

Does the icom a2 no work with Ista/P v 3.60?

Yes also work with 3.60.3