[narf]

I I have disabled the dpf and egr.
But I am not able to disable the additive. I'm looking damos, and I can not find the switch. Or deactivate the strategy.
Can somebody help me? please.

[max40]

If you want i would recommend disconnecting the additive tank and detecting the dtc present .. after you can delete this and your problem is resolved

[narf]

If you want i would recommend disconnecting the additive tank and detecting the dtc present .. after you can delete this and your problem is resolved

I think we have to remove it from the ECU. Switch, or by strategy.

[Wildey1771]

When it comes to time of regen then car will be in limp mode. So that is not a good solution for long term. I thought they got rid of the additive shit years ago.

[konstantin]

You can refill it with diesel or anything else reset it and no more problems

[Wildey1771]

Or if you measure resistance whilst full and no errors, just put same resistor in place on wiring and all is good

[compacell]

I think you are able to switch off with lexia in bsi,just need to change addidative by fap somethink like that,need special code also

[narf]

I have read, that the solution is to remove it from the ECU. The additive is not adblue, it is a special additive of peugeot.
I'm with give and I see some possible solutions, but I have not worked, I can not find the switch to deactivate the additive, or eliminate its strategy.
I'm tired of this car.

[betrescudan]

Disconect pump aditive...read dtc...make dtc off...job done

[narf]

Disconect pump aditive...read dtc...make dtc off...job done

http://cartechnology.co.uk/showthread.php?tid=18399

mike_service Offline
VIP Donator
******
VIP Donators Posts: 451
Threads: 7
Joined: Nov 2013
Reputation: 158
Thanks: 68
Given 352 thank(s) in 199 post(s)
RE: Berlingo 2011 edc17C10 dpf off
Hi

Even these dtc are disable that car will get limp mode after 3-4km,you have to disable entire strategy for additiv pump and module !





Are you sure? Here in this post is said to have to eliminate the strategy.