[kingdomdz]

Hi
i did a mileage calibration for both Renault kangoo 2012 dash and clio 3. i want to light the 2 dashes with carprog + D1 + A15, but i can't find where to place the pins. both dash have same connector, grey 24 pins (12 + 12).
any help please

[pawel7924]

Hi
i did a mileage calibration for both Renault kangoo 2012 dash and clio 3. i want to light the 2 dashes with carprog + D1 + A15, but i can't find where to place the pins. both dash have same connector, grey 24 pins (12 + 12).
any help please

I think without can emulator dashes didn't start.
megane 3 start when you connect 100 ohm resistor beetwen can h and can l

in megane connector is same 24 pins
pin2 +
pin3 gnd
pin11 can l
pin12 can h
check connection i didn't know is correct (power/ground) check on capasitor,
can check on can brigde