Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MT401 experience feedback
11-11-2017, 08:26 AM,
Post: #11
|
|||
|
|||
RE: MT401 experience feedback
Hi again, i destroyed a mercedes A class W169 of 2006 with my digiprog3, there was some blogs here which say if you program w169 cluster with clip adapter or with st60 cable to 999999, just to block the ezs, put in the car and after 2 to 5 minutes with open ignition and than remove it again and reprogram again to the km you need , it will work, but not in my case, the cluster was freeze at 999999 even ti show the right km at digiprog and other tools but the display was freeze at 999999 even on table workbench, so after my first success with my mt401 trying at a w245, which is the same as w169, i try at this dissapointed client, so it work, it fixed the cluster through obd port, there was no solution allover the internet about that cluster, believe me, i searched a lot, this tool worth its cost, it is a great tool
one more time mercedes A class w169 km ok, and fix the demaged cluster too thanks one more time obdprog |
|||
12-11-2017, 12:11 PM,
Post: #12
|
|||
|
|||
RE: MT401 experience feedback
Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ???
IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
13-11-2017, 19:57 PM,
Post: #13
|
|||
|
|||
RE: MT401 experience feedback
(12-11-2017, 12:11 PM)Stig33 Wrote: Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ??? hi, if you mean this cluster https://www.youtube.com/watch?v=6KJUQKFpLAc it work for sure my friend |
|||
14-11-2017, 09:05 AM,
Post: #14
|
|||
|
|||
RE: MT401 experience feedback
(12-11-2017, 12:11 PM)Stig33 Wrote: Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ??? Passat NEC+24C32 Read write mileage Read EEPROM Write EEPROM NEC+24C64 VDO -12 NEC+24C64 color meter(type 1) Read EEPROM Write EEPROM Read write mileage NEC+24C64 color meter(type 2) Read EEPROM Write EEPROM Read write mileage NEC+24C64 13- white meter Read EEPROM Write EEPROM Read write mileage VDO K line 2014 passsat is supported !!!!!!! |
|||
21-11-2017, 19:11 PM,
Post: #15
|
|||
|
|||
RE: MT401 experience feedback
(14-11-2017, 09:05 AM)obdprogwendy Wrote:(12-11-2017, 12:11 PM)Stig33 Wrote: Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ??? Unfortunately this tool don't working with this car.....I'm sad..... IF I HELPED TO YOU, USE THX+REP BUTTON.
VAG EDC/MED17, PCR2.1, BCM2, CCM IMMO TRANSFERRING, PKLASSE CHANGE MY GENUINE TOOLS: KESS3, AUTOTUNER, HEXTAG |
|||
22-11-2017, 10:18 AM,
Post: #16
|
|||
|
|||
RE: MT401 experience feedback
DONT BUY THIS SHIT TOOL!
i got vag one mt006 golf 5 2007 mileage is ok, to read pin must use touran menu oktavia 3 2013 year , vdo dash, not working, it brings you back to main menu golf 7 2014.6 same thing!!!!!!!! for vag only its nothing more than vag k+can 2,0 super vag! waste of moneys!! really dont buy it if you want to do newer cars, get something else!!! my 2 cents its doesnt even worth sending it back cheers BP |
|||
30-11-2017, 06:55 AM,
Post: #17
|
|||
|
|||
RE: MT401 experience feedback
You have to tighten your buttocks every time you use
what to say to your friend or customer if the car does not start |
|||
14-12-2017, 08:25 AM,
(This post was last modified: 14-12-2017, 08:27 AM by zgjana.)
Post: #18
|
|||
|
|||
RE: MT401 experience feedback
(22-11-2017, 10:18 AM)blackpirate Wrote: DONT BUY THIS SHIT TOOL! maybe i share the same experience with you for MT006 , and probably you are right, but this one is a thread about MT401 and i have respect for this tool, so find the write place for MT006 and give your opinion or your feedback, and maybe i will follow you, do you own a MT401 ? |
|||
14-12-2017, 18:16 PM,
Post: #19
|
|||
|
|||
RE: MT401 experience feedback
For me
i not play wiht this tool is real fake to fake |
|||
14-12-2017, 18:36 PM,
Post: #20
|
|||
|
|||
RE: MT401 experience feedback
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content