Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D 4.09.13 Standalone
|
21-12-2017, 19:24 PM,
(This post was last modified: 21-12-2017, 19:38 PM by Twoone.)
Post: #71
|
|||
|
|||
RE: ISTA-D 4.09.13 Standalone
(21-12-2017, 19:06 PM)frederikjensen Wrote:So K-DCAN Cable. Have you installed Ediabas? Is Nesesary.(21-12-2017, 18:58 PM)Twoone Wrote:I use the usb/serial interface(21-12-2017, 18:50 PM)frederikjensen Wrote: Have I already done but. When I try to read out vin nothing happens?witch interface do you use? COM port setting must be right, latency to "1" and if you have 64bit a register setting. And of course VCI setting in ISTA must be EDIABAS. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
23-12-2017, 22:05 PM,
Post: #72
|
|||
|
|||
RE: ISTA-D 4.09.13 Standalone
Has anyone had an issue with this version not recognizing the car?
I installed on Win 10 x64, EDIABAS set to ENET, esys works fine with same cable but ISTA cannot see car whether set to EDIABAS or ENET Local Area Network or Direct Connection. Car is 2015 f10 |
|||
|
|
|
24-12-2017, 00:25 AM,
Post: #73
|
|||
|
|||
RE: ISTA-D 4.09.13 Standalone
(23-12-2017, 22:05 PM)mcrussell Wrote: Has anyone had an issue with this version not recognizing the car? Are you connecting via EDIABAS config or ENET? I have no trouble with this version on Win 10 x64 and ENET for any car, including '16 F010, '16 F015, '18 G030, and '18 G001. |
|||
|
|
|
24-12-2017, 01:26 AM,
Post: #74
|
|||
|
|||
|
ISTA-D 4.09.13 Standalone
I have tried both, I usually set EDIABAS with easy connect which shows 12v, ISTA is set to EDIABAS but when I start connection it says vehicle cannot be identified, inpa reads car ok though.
I have disabled windows firewall but no change, I can’t think if I’ve missed anything else Sent from my iPhone using Tapatalk |
|||
|
|
|
24-12-2017, 02:07 AM,
Post: #75
|
|||
|
|||
RE: ISTA-D 4.09.13 Standalone
(24-12-2017, 01:26 AM)mcrussell Wrote: I have tried both, I usually set EDIABAS with easy connect which shows 12v, ISTA is set to EDIABAS but when I start connection it says vehicle cannot be identified, inpa reads car ok though. I never use EDIABAS. |
|||
|
|
|
24-12-2017, 09:19 AM,
Post: #76
|
|||
|
|||
|
ISTA-D 4.09.13 Standalone
I tried that option & it brings the connection page up & shows ENET free but when I Schlick set up connection it still fails.
Very strange Sent from my iPhone using Tapatalk |
|||
|
|
|
04-01-2018, 17:48 PM,
Post: #77
|
|||
|
|||
|
RE: ISTA-D 4.09.13 Standalone
Can you please upload the files SQlite database (streamdataprimitive_RU.sqlite & xmlvalueprimitive_RU.sqlite). Thank you.
|
|||
|
|
|
04-01-2018, 18:33 PM,
Post: #78
|
|||
|
|||
|
RE: ISTA-D 4.09.13 Standalone
You can download them from the torrent on this thread. http://cartechnology.co.uk/showthread.php?tid=30815
|
|||
|
|
|
05-01-2018, 17:20 PM,
(This post was last modified: 05-01-2018, 17:23 PM by mcrussell.)
Post: #79
|
|||
|
|||
|
RE: ISTA-D 4.09.13 Standalone
Still seem to be having issues with this version, I have re-installed a fresh W7 64bit with all windows updates then installed latest java32&64, Redist 2016 x32 & x64 & .net 4.6.2.
eSys works fine but ISTA shows the below errors. |
|||
|
|
|
05-01-2018, 17:38 PM,
Post: #80
|
|||
|
|||
RE: ISTA-D 4.09.13 Standalone
(05-01-2018, 17:20 PM)mcrussell Wrote: Still seem to be having issues with this version, I have re-installed a fresh W7 64bit with all windows updates then installed latest java32&64, Redist 2016 x32 & x64 & .net 4.6.2. Pretty sure you need all the redist including the 2017 and also netframework 4.7. If you don't have them then download the tools directory from the Spider80 torrent. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content
