[beti88]

Hi I have some questions : vw passat b6 2008 - there is
1. 24c32/servicemode
2. Tacho diag c32
Tacho diag c32/c64
Diag color
Service

Can you please explain why there is number 1 and 2 when there is tacho diag c32/c64???

Witch one of them should I use??? Can I just pick tachodiag c32/c64 and everything is ok?

What is diag color?



Same thing is on vw golf 6 but there is also tacho MM7 hcs12
Where do I get one hcs12 ??? And how do I know it's a mm7 that needs hcs12?

Look at the meny yourself and help me out with this please

Have anyone done Audi a6 2011? Vw passat 2010 ? Or vw golf 2011 ?? If yes how did you do in steps

Thank you guys for sharing your brains


Please help me

------------------------------------------------------------------------------

Did you get some help? I have the same question about passat

No i did not get any help but if you get please write here

I tested on my Passat with Tacho diag c32/c64 but it say NO CONNECTION. I Think it must be done by 24c32/servicemode as first step then Tacho diag c32 as second step to get it work.

[beti88]

Hi I have some questions : vw passat b6 2008 - there is
1. 24c32/servicemode
2. Tacho diag c32
Tacho diag c32/c64
Diag color
Service

Can you please explain why there is number 1 and 2 when there is tacho diag c32/c64???

Witch one of them should I use??? Can I just pick tachodiag c32/c64 and everything is ok?

What is diag color?



Same thing is on vw golf 6 but there is also tacho MM7 hcs12
Where do I get one hcs12 ??? And how do I know it's a mm7 that needs hcs12?

Look at the meny yourself and help me out with this please

Have anyone done Audi a6 2011? Vw passat 2010 ? Or vw golf 2011 ?? If yes how did you do in steps

Thank you guys for sharing your brains


Please help me

------------------------------------------------------------------------------

Did you get some help? I have the same question about passat

No i did not get any help but if you get please write here

I tested on my Passat with Tacho diag c32/c64 but it say NO CONNECTION. I Think it must be done by 24c32/servicemode as first step then Tacho diag c32 as second step to get it work.

Servicemod worked, but Tacho Diag C32 didn't work!

[stole]

ALFA 156, 147 ,166, .... What is your experience???

[NANO]

Greetings,

Quick question I cannot seem to resolve scanning the internet. I have 4.85 rev. unit and like others, when I connect to BMW OBD I get a mileage that is not correct from my car, it gives option to click no, and another wrong mileage comes up, so I am stumped, for even when I do hit check on one or the other wrong miles indicated, nothing changes. Unit appears to be working properly, but my confusion comes from some instructions that say I have to register DigiProg 3 first and install drivers on my computer? I have windows 7, and instructions are for XP which is different. Not being a computer geek, how do I install proper drivers to register unit as instructed, and is this required before unit will read proper mileage on my car.

Thanks,

[JohnB]

Hi guys
i just bought this Digiprog III V4.85
does somebody know how to connect the ST01 to the chip?
there are two ways and i dont want to damage anything..
one connection wire on the ST01 is red colored!!

[23Andi23]

Hi guys
i just bought this Digiprog III V4.85
does somebody know how to connect the ST01 to the chip?
there are two ways and i dont want to damage anything..
one connection wire on the ST01 is red colored!!

Friend welcome to Garage Automotive
First of all >>READ THE RULES<<
Then your first post should be >>HERE!!<<

[gksuber]

The red wire goes to pin No1 of the chip. Next to pin No1 there is a little hollow dot on the chip, look closely!

[octav_kiss]

Hy
I tried digiprog 3 on passat 2007
the gearbox wrong km
wrote 0 and could not change

[cdipower]

Hy
I tried digiprog 3 on passat 2007
the gearbox wrong km
wrote 0 and could not change

I think only reset funktion

[semcrer]

Hello,

I have a digiprog III v4.88 and I can´t change the mileage via obd on a 2009 Ford Mondeo MK4 (the one with a large lcd sreen)!

It connects but it can't read nor write the mileage.

What am I doing wrong ?

Can someone give me a tip or post the instructions ?

Thank You,