Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P 3.60 error 94201 63014 technical service initialization failed
23-01-2018, 11:42 AM,
Post: #21
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
This is a totally different error sad
Quote this message in a reply
23-01-2018, 12:24 PM,
Post: #22
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
But you can try...
Quote this message in a reply
07-03-2018, 12:38 PM,
Post: #23
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
I have same problem. I can use last firmware but not support F series programming. Same software same firmware different icom A2 try succesed programming. in my opinion not support processor.
Quote this message in a reply
18-09-2018, 06:45 AM,
Post: #24
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
I have same error and have tried all the suggestions and linked suggestions. Is there anything new to try? ISTA+ tells me I need to update software using ISTA/P but I thought ISTA+ was supposed to do that. That is following a NOX sensor fault on a 328d.
Quote this message in a reply
23-10-2018, 01:33 AM,
Post: #25
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
has someone solved this problem?
Quote this message in a reply
29-10-2018, 09:44 AM,
Post: #26
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
The problem is the ICOM it self, I have 2 of them, the first one which I failed to upgrade the firmware works with ISTA-p without any error, when I connect the ICOM with updated firmware it will give the same error and faults like everyone here, that mean new firmware in ICOM will not work with ISTA-P 3.60.
Hope I'm reight
Quote this message in a reply
26-01-2019, 07:24 AM,
Post: #27
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
(29-10-2018, 09:44 AM)zaweel Wrote:  The problem is the ICOM it self, I have 2 of them, the first one which I failed to upgrade the firmware works with ISTA-p without any error, when I connect the ICOM with updated firmware it will give the same error and faults like everyone here, that mean new firmware in ICOM will not work with ISTA-P 3.60.
Hope I'm reight

I am almost sure (maybe not in your case) that the problem is not in icom is not in the installation ista files, only the problem is zgw
connect whatever you want and you will not program it anyway, why? because zgw does not give a connection

check zgw in tool32 and You can see that programming is not active, or inpa ability to wakeup is OFF  biggrin

Sorry, translator wrote


If it my post is helpful, please push rep and press thanks to me . . .
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW Service history by VIN bmt_hr 6,421 555,332 38 minutes ago
Last Post: AlexRom
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,799 716,165 11 hours ago
Last Post: Sedoy
  ista 4.46 Standalone kiranabc 114 17,284 Yesterday, 17:28 PM
Last Post: kiranabc
  CAS flash failed claw 11 327 13-06-2024, 12:29 PM
Last Post: claw
  Touch Command Service Updater Skept 12 2,101 13-06-2024, 10:42 AM
Last Post: Fedosoff
XZBMW ISTA Czech Database ( 4.43.XX - 4.47.XX) inspi1981 68 8,730 11-06-2024, 12:51 PM
Last Post: inspi1981
XZBMW ISTA+ 4.47.4x Install Files - MEGA shawnsheridan 5 1,272 10-06-2024, 14:18 PM
Last Post: CATAHA
  F8x NBT Refrofit Flash Failed; Fatal Error Help mitch32 5 193 10-06-2024, 09:47 AM
Last Post: painsage
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 133 17,144 10-06-2024, 06:14 AM
Last Post: NeRkO20
XZBMW ISTA 4.47.4x I-LEVEL+OVERVIEW AutoExe3219 0 193 10-06-2024, 00:53 AM
Last Post: AutoExe3219

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content