[robka]

Which Typeschlussel would you use for X3 35d?

[weby]

Anybody flash the Alpina EGS on a F10 550i xDrive 2012?

Same HW DME to gain about 100hp for free?

[danyro]

Which Typeschlussel would you use for X3 35d?

Try typekey WY71 plus 2 fa options listed few post earlier like 920...
You should have the new sw containing 210c in the tal

I did on my f25 x30d succesfully

[kil2002]

Which Typeschlussel would you use for X3 35d?

Try typekey WY71 plus 2 fa options listed few post earlier like 920...
You should have the new sw containing 210c in the tal

I did on my f25 x30d succesfully

What istep shipment did you use? cars original one or another one?

Also if anyone can help, what istep shipment should i be using for a F10 535D?

[danyro]

I used the original istep shipment delivered from factory.
Car istep shipment is the original istep came from factory.

[weby]

I won´t load Alpina DDE SW because I have already modified original SW and I don´t want to lose it.

U can always read and save your maps, this is not problem today.
Alpina 5, 7 N63 msd85 use another turbo, but when u flash simple f01,f10, f12 with alpina software - nothing happens and have +100HP

Today I flash a 550i to Alpina B5 EGS and DME (408 to 507 hp version). All works fine, but I get a DME varianten error. They detected the wrong software for this VO. I dont try to write the manipulated VO to write in the car and flash the DME back to stock oem.

Works very well!

[Peej]

Can one also use this method to flash 125i gearbox software on a 116i?

[Typergaz]

Hi all im fairly new to this forum after just buying my f36 435d a couple of weeks ago, I have been doing some reading and i must of read this thread atleast 3-4 times.. I have ordered a enet cable with software but it seems to be the esys launcher 2.82 and pzdata 63.3. Will this be ok to do this alpina flash?. I wont be home from work for a couple of weeks so the things i have read dont seem to make much sense at the moment but im sure it will all make sense when i navigate through esys. I do have a few questions if some one is willing to help me out once everything is installed and up and running. 

Thanks in advance 

Garry

[weby]

Today I spent few hours again on the F07 (2010) from my neighbour.
Iam not able to flash the Alpina EGS, because the HWEL ID is 01.
The F10 PreLCI and LCI have the ID 03 at the end and another bootloader version.
The last I-Step is installed on this car.

I manipulated the TAL and change the HWEL and BTLD informations
I only do a swdeploy and cddeploy. The SWFL flashed successfully into the ecu, but doesnt work.
GWS without lighting led and the SWFL shows as UNKNOWN. I dont they need the correct bootloader for this swfl files.

I dont force to flash the BTLD, because the HWEL ID is not the correct one for this ECU. I dont want to brick the ecu with a wrong bootloader. The first numbers of  the bootloader are the same and only the version numbers are different. But why BMW dont update the HWEL 01 anymore?

Can anybody tell me what is the missng point for a correct solution?
Is the bootloader from HWEL 03 a must have to use the correct swfl?
Does this bootloader works fine with HWEL 01?

[Fatalix]

Is this possible to code on a 2012 F20 M135i? If so, which Typschlüssel and Zeitkriterium is used? Thanks