Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw NBT Evo retrofit Rear Camera
|
16-05-2018, 15:37 PM,
Post: #11
|
|||
|
|||
RE: Bmw NBT Evo retrofit Rear Camera
(16-05-2018, 15:09 PM)pabloMG Wrote: It depends of the emulator,the caraystem emulator have this option,bimmer dont know,on the e39 that have y instaled a icam and have guidince line and obstacle options original from the icam camera,the icam camara not need any aditional hardware to se the lines and obstacle mark,yes you need the conector for camera and the handle but is cheap the handle 20euros and the conector other 25euros,whow much for binmer tech camera?y think that is a best option,first talk to bimmer to see if the emulator have this option Do you have any pictures of this option with carsystem emulator ? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
16-05-2018, 15:42 PM,
Post: #12
|
|||
|
|||
RE: Bmw NBT Evo retrofit Rear Camera
(16-05-2018, 15:09 PM)pabloMG Wrote: It depends of the emulator,the caraystem emulator have this option,bimmer dont know,on the e39 that have y instaled a icam and have guidince line and obstacle options original from the icam camera,the icam camara not need any aditional hardware to se the lines and obstacle mark,yes you need the conector for camera and the handle but is cheap the handle 20euros and the conector other 25euros,whow much for binmer tech camera?y think that is a best option,first talk to bimmer to see if the emulator have this option Can you please let us know where to buy wiring loom for 25 euro and handle please Thanks |
|||
|
|
|
16-05-2018, 18:32 PM,
Post: #13
|
|||
|
|||
|
RE: Bmw NBT Evo retrofit Rear Camera
I can confirm Icam does not need additional hardware for obstacles etc. Just retrofitted a Pre LCI F10 with car systems emulator and NBT-ICAM works perfect. Wiring loom is pretty straightforward. Can use shielded cable from cctv camera installations. Need power/GND, Can H/ Can L, and FBAS +/-. So a 8 wire cctv cable should be good to go.
|
|||
|
|
|
16-05-2018, 19:19 PM,
Post: #14
|
|||
|
|||
RE: Bmw NBT Evo retrofit Rear Camera
(16-05-2018, 18:32 PM)sebastianfernandes Wrote: I can confirm Icam does not need additional hardware for obstacles etc. Just retrofitted a Pre LCI F10 with car systems emulator and NBT-ICAM works perfect. Wiring loom is pretty straightforward. Can use shielded cable from cctv camera installations. Need power/GND, Can H/ Can L, and FBAS +/-. So a 8 wire cctv cable should be good to go. Why bother making your own with special ICAM camera connector if original costs 25 euro? If you have part number for original loom please share. Thanks |
|||
|
|
|
16-05-2018, 20:05 PM,
Post: #15
|
|||
|
|||
RE: Bmw NBT Evo retrofit Rear Camera
(16-05-2018, 19:19 PM)bmwcoder75 Wrote:(16-05-2018, 18:32 PM)sebastianfernandes Wrote: I can confirm Icam does not need additional hardware for obstacles etc. Just retrofitted a Pre LCI F10 with car systems emulator and NBT-ICAM works perfect. Wiring loom is pretty straightforward. Can use shielded cable from cctv camera installations. Need power/GND, Can H/ Can L, and FBAS +/-. So a 8 wire cctv cable should be good to go. So if i correctly understand, i only need icam and his wires ? Don’t need any camera module such as Trsvc module ? Can i install icam to rear and front of the car ? Or only for rear camera ? |
|||
|
|
|
17-05-2018, 16:28 PM,
Post: #16
|
|||
|
|||
|
RE: Bmw NBT Evo retrofit Rear Camera
Y write 25 euros the conector,need to make the wirring
|
|||
|
|
|
17-05-2018, 18:24 PM,
(This post was last modified: 17-05-2018, 18:25 PM by bmwcoder75.)
Post: #17
|
|||
|
|||
|
RE: Bmw NBT Evo retrofit Rear Camera
|
|||
|
|
|
03-10-2018, 21:07 PM,
Post: #18
|
|||
|
|||
RE: Bmw NBT Evo retrofit Rear Camera
(16-05-2018, 18:32 PM)sebastianfernandes Wrote: I can confirm Icam does not need additional hardware for obstacles etc. Just retrofitted a Pre LCI F10 with car systems emulator and NBT-ICAM works perfect. Wiring loom is pretty straightforward. Can use shielded cable from cctv camera installations. Need power/GND, Can H/ Can L, and FBAS +/-. So a 8 wire cctv cable should be good to go. Hallo, please you can tell me if this use can1, can 2 or can 3 ? Thank yoy |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| F20 cruise control retrofit | maninblack | 5 | 128 |
Yesterday, 18:09 PM Last Post: qbek90 |
|
|
BMW e87 LCI hralights retrofit problem | XeoN | 0 | 22 |
21-05-2024, 21:17 PM Last Post: XeoN |
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 308 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 54 |
16-05-2024, 11:57 AM Last Post: mcrussell |
| retrofit USB BMW E63 | Jalami | 9 | 257 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
|
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 420 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
| Help for front and rear camera with iCam in e9x | ruben_17non | 0 | 73 |
13-05-2024, 13:54 PM Last Post: ruben_17non |
|
| F25 cic retrofit | hero3838 | 3 | 111 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
|
|
G21 paddles retrofit | bm92 | 5 | 225 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 107 |
08-05-2024, 14:22 PM Last Post: hitit |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
