Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Rheingold ISTA-D Standalone 3.54.30 (base files)
01-05-2016, 09:54 AM,
Post: #41
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
Affected only frm3, not frm2
|
|||
01-05-2016, 12:49 PM,
Post: #42
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
Maybe it's on combination with ICOM Next ?
Have heard that's not working smoothly at the moment. Would be happy if someone give us suitable answer. |
|||
01-05-2016, 23:14 PM,
Post: #43
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
Problem is on frm side, not diagnostics.
|
|||
02-05-2016, 15:46 PM,
Post: #44
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
ISTA/D 3.55.11 out soon.
|
|||
Reputation: +6 - Marcos [+1] , 530d [+1] , ruben_17non [+1] , simonchs [+1] , Paul [+1] , tunning-gsm [+1] | |||
02-05-2016, 20:03 PM,
Post: #45
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
(02-05-2016, 15:46 PM)beemerboy88 Wrote: ISTA/D 3.55.11 out soon. Great!! important changes in V55? Thanks Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
02-05-2016, 22:22 PM,
Post: #46
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
Started testing standalone base files today. Release this week.
|
|||
Reputation: +4 - ruben_17non [+1] , simonchs [+1] , aboulfad [+1] , BMWLorenz [+1] | |||
03-05-2016, 00:29 AM,
Post: #47
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
(02-05-2016, 20:03 PM)ruben_17non Wrote: Great!! Update of vehicle master data. The vehicle master data system has been standardised across BMW. Therefore the vehicle master data has been adapted in ISTA. When identifying a vehicle using basic feature selection, the "national-market version" field has been omitted and the "basic version“ has been introduced instead. The basic versions available are ECE and US. Select "US" in the case of vehicles for the US market, for all others select "ECE". End of support for ISID R1 and IMIB R1. From ISTA 3.55 on, ISID R1 and IMIB R1 will no longer be supported. The installation of ISTA on an ISID R1 will be disabled. It will also no longer be possible to connect ISTA with an ISID R1. New minimum system requirements from ISTA 4.01 on. From ISTA 4.01 on (rollout planned in August 2016), due to the introduction of the programming functionality in ISTA, the minimum system requirements will be adapted as follows: • Processor with at least 2 cores and 2.2 GHz • At least 4 gigabyte RAM • At least 500 gigabyte hard disk • Alternatively: ISIDR2 New ICOM Next firmware 03-14-08. A new ICOM Next firmware with version number 03-14-08 will be delivered with ISTA 3.55. There are also improvements in the execution of the vehicle test in old series. Displaying and reopening old Service Cases. Due to the update of the vehicle master data it is not possible to reopen or resume Service Cases created with ISTA 3.54 or lower. ICOM Next: Vehicle test not possible for DME in old series. A vehicle test of the DME is not possible in old series. DME must be deselected for a vehicle test in old series. Please use the ICOM as a workaround. |
|||
Reputation: +2 - simonchs [+1] , ruben_17non [+1] | |||
03-05-2016, 10:51 AM,
Post: #48
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
|
|||
Reputation: +9 - coriducu [+1] , mattydr67 [+1] , Joe2 [+1] , simonchs [+1] , Johny [+1] , umutbulut [+1] , weiss [+1] , tunning-gsm [+1] , brutten87 [+1] | |||
27-10-2018, 10:15 AM,
Post: #49
|
|||
|
|||
RE: Rheingold ISTA-D Standalone 3.54.30 (base files)
Disable FASTA for Rheingold 3.53.13
|