[Dolcevita]

From begin also want albe to read it got every try same error as above , even kess wasnt able to read it
one old me not nessesary to read with id is all fine so i tried to wrote mod ....


Ps also writing original Mpps try to make checksum at 100% and zack ..

this file should be original

[Dolcevita]

seems to be eco is dead , no bdm nothing
any idea how I can get car working again ?
if I buy used one can I just Make Immo off and all be fine ?

[Gabriel87]

Yes or search full bdm...
you have used ecu send me ecu maiby i try for you...
I'm in italy

[Dolcevita]

and with full bdm will work ?

you can I solder e2p from original ?

[Gabriel87]

Yes buy same ecu hw 0281101....
You write full bdm and car start without problems.

[Dolcevita]

but I from were can I get full bdm
don't got it and not able to read bdm from broken eco

HW: 0281017808
SW: 1037516208
VIN nr.:
SW ver.:
Spare: 51902999
Engine:
HW Ver.:
SW upg.:
Installation:
can some one help ?

[budzasto]

What is your operating system? for mpps v12,13,16 is not recommended win7,  but mpps v18 was created for win7. It is what it is...I suggest you take the kess and try recovery mode with original file. In that way I saved the situation so many times.

[Dolcevita]

kess as written no way error , even geniue tool , Mpps v16 -> xp
Mpps v18 win 10 ...