[sqorpius]

Hi, 

I am currently having the following problem with MOVE 2018-2 in a BMW F31 2013

It updated till 5% and then rebooted. After reboot it does not read navi USB anymore (tried 3 different USB's) It says 

"Navigation is not available, ensure to complete the update"

I also tried 2018-1 on different USB, also did not work. I let car sleep and reset CHAMP2 numerous times. 

Does anyone have a solution for this? Or can point me in the right TOOL32 argument job to clear this?

Thanks!

[paulgsm]

Did you move the car while doing map update ?

Check USB to be Fat32 formated !

[sqorpius]

Did you move the car while  doing map update ?

Check USB to be Fat32 formated !

Yes I did move the car while updating. Of course, all 4 different USB's sticks that I always use for updates, are FAT32 formatted, even reinstalled. The problem is now that the navigation will not allow me to proceed with the update. It just "hangs". I think there are TOOL32 jobs/arguments that can solve this. But not sure which ones.

[s3000]

Try that the next day.

That the navi should fall asleep.

[sqorpius]

Thanks. Sleep did not solve. Who knows tool32 job/arguments?

[sqorpius]

Anyone knows the tool32 job/argument?

[smercki]

I think the SD card has been corrupted, and it can not be restored with tools32, you can try to program the HU unit, if it is still seen by E-sys

[sqorpius]

HU works perfectly besides navigation. You suggest flashing champ2?

[smercki]

HU works perfectly besides navigation. You suggest flashing champ2?

first make a diagnosis with Ista and see if he offers some recovery program

[sqorpius]

HU works perfectly besides navigation. You suggest flashing champ2?

first make a diagnosis with Ista and see if he offers some recovery program

Already tried ISTA, it states that MAP DATA is not available. Corresponding ABL = to install new map data through USB, but it wont let me. USB loads, but CHAMP2 does not kick in map install mode..