Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
14-05-2022, 18:28 PM,
Post: #831
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
any Windows 11 Support yet? It verifys MD5 files and then quits, but no files were copied.
|
|||
14-05-2022, 18:57 PM,
(This post was last modified: 14-05-2022, 19:00 PM by Bimmer540.)
Post: #832
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
|
|||
14-05-2022, 19:16 PM,
Post: #833
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
There is no ExecutionBreak needed/available for this version 4.35.x ?
|
|||
14-05-2022, 19:18 PM,
Post: #834
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
|
|||
15-05-2022, 20:10 PM,
Post: #835
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
I will try to delete and reinstall, but my ICOM is not seeing the updated firmware and application for the access of 4.35.20. If anyone has the same issue and remedy please share. All of my install have been golden, but this one went bonkers....
|
|||
15-05-2022, 20:13 PM,
Post: #836
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Do you see icom in itoolradar?
Did you use the .exe from Sedoy? |
|||
15-05-2022, 22:08 PM,
Post: #837
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
I can do all like normal just cannot scan, when it comes to that it asked for firmware update but ICOM already running the latest firmware
|
|||
16-05-2022, 02:38 AM,
Post: #838
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(15-05-2022, 22:08 PM)Nygel Wrote: I can do all like normal just cannot scan, when it comes to that it asked for firmware update but ICOM already running the latest firmware I have the same issue But if i wait 1mins or so it workes fine Then it doesnt shows frimware anymore and is now on free I have heard there is somewhere an option to disable ista checking in some registry for the latest firmware maybe somebody knows more about this If you have already the latest firmware on your icom then it shouldn’t be a problem i think |
|||
16-05-2022, 07:44 AM,
Post: #839
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Sometimes you must do it 2 times fw update before its good. Try it update with ista and inc stal .msi
|
|||
16-05-2022, 20:43 PM,
(This post was last modified: 16-05-2022, 21:12 PM by Toytoy190.)
Post: #840
|
|||
|
|||
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Thanks Sedoy for ISTA ! you are awesome !
Hi, Does anyone have the French SQLitedb for this version of ISTA ? Thanks in advance. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
17 Guest(s)
17 Guest(s)
Return to TopReturn to Content