[egoy936]

Hello, I just installed NBT EVO in 2015 f06. Everything works except surround view. When putting in reverse or clicking the camera button only the side view pops up. There is no way to change to surround view or rear camera.


I can see that TRSVC is set for camera type on the NBT2. VO has surround set. Any clues?

Thank you in advance

[Jartsa]

When you put on reverse do you have the rearview camera picture? there is surround view on the side menu of the evo.

[egoy936]

When you put on reverse do you have the rearview camera picture? there is surround view on the side menu of the evo.

When you put the car in reverse just the side view image comes up as shown in the attachments. There is no menu when in side view. All was working correctly with NBT before!

[Jartsa]

there must be something wrong with wiring / or coding with the video inputs. Do you have all cameras wired to trsvc module and there the fbas wiring comes to evo?

[stecom90]

Like Jartsa said, seems to be wiring or coding problem.
I installed an EVO in my F13 2013, no problem.
If you need some file to compare...

[egoy936]

I just noticed the Car's istep is 21 11. The NBT istep is 18 03. Could this be the issue? The camera module is on an istep too new?



Attached is the VO I used on the radio. Also attached is the CAFD I used on NBTEVO and TRSVC module.

Any other suggestions. I have check ISTA zero errors. I do not think it is a wiring issue.

[kola]

Please check CAM_ECU you have wert_1 should be wert_11

[egoy936]

I figured out the issue! You need to set the parameter communication_parkmaster to gen1 if your car has TRSVC. This thread is solved!

Thank you