[wieliao]

Hi
have anyone seen the zh-tw language pack? for 4.37.4x? or 4.32.1x?
Thank you.

[Fraizer]

hi

any idea what cars remove bmw from ista-d ? i understand because bmw remove cars it need to renew the licences then i m thinking maybe they remove my lovely E64... ^^

[NeRkO20]

hi

any idea what cars remove bmw from ista-d ? i understand because bmw remove cars it need to renew the licences then i m thinking maybe they remove my lovely E64... ^^

What do u mean with "removed"? There was nothing removed...
E64 still possible to read fault codes and so...

Softwareupdates on E-series has to be done with ISTA-P that is the only thing...

[Fraizer]

hi

any idea what cars remove bmw from ista-d ? i understand because bmw remove cars it need to renew the licences then i m thinking maybe they remove my lovely E64... ^^

What do u mean with "removed"? There was nothing removed...
E64 still possible to read fault codes and so...

Softwareupdates on E-series has to be done with ISTA-P that is the only thing...

Sedoy have to renew the licences for ista D he explain (maybe i understand bad) is due because BMW remove cars from ISTA-D then i was asking if bmw remove the E series like my E64 (E60).

Yes to read errors, to make maintenance etc...

then i understand they dont remove it from ISTA-D right ? ^^

[Sedoy]

Not cars, brands removed.

[Nixer]

Hello All,
I used BMW standard tools, INPA, ISTA-D and ISTA-P to diagnose and code my E92. I recently got an F10 (2014 535i) with NBT. All i want to do is do some basic coding such as psi/temp display, digital speedo and scan for codes.

I have K+DCAN and  ICOM A2+B+C (Clone) that I used with E92. Can I use these interfaces to code F10? What programs/applications do I need? Can INPA, BMW Standard tools and ISTA D/P still be used on F10? 

I see there is an ISTA standalone but not sure how it is different from ISTA/D or ISTA/P. I've been reading a lot but only getting more confused.

Hoping someone that was in my situation can help!

Thanks in advance.

[Kentener]

You don´t need a new Interface and ISTA-D should be no problem.

But for coding you need Esys, NCS-Expert is only for E-Models.

[Fatalix]

Removed registry files using Rcleanerv4.4 before install, but after install of 4.37 i have errors that programming data is invalid. Same happened for 4.36.xx install?

[Nixer]

You don´t need a new Interface and ISTA-D should be no problem.

But for coding you need Esys, NCS-Expert is only for E-Models.

Thank you!
What about ISTA standalone? How is it different than ISTA-P?

[JiiVee92]

What happens, if i try use 4.37.22 psdzdata's with ista 4.32.15?

Or even newer version of psdzdata than that 4.37.22